And you can free download the demos of the 350-401 Latest Exam Sample practice engine to have a experience before payment. During the operation of the 350-401 Latest Exam Sample study materials on your computers, the running systems of the 350-401 Latest Exam Sample study guide will be flexible, which saves you a lot of troubles and help you concentrate on study. If you try on it, you will find that the operation systems of the 350-401 Latest Exam Sample exam questions we design have strong compatibility. Goldmile-Infobiz provide a training scheme for Cisco certification 350-401 Latest Exam Sample exam, which only needs 20 hours to complete and can help you well consolidate the related IT professional knowledge to let you have a good preparation for your first time to participate in Cisco certification 350-401 Latest Exam Sample exam. Cisco certification 350-401 Latest Exam Sample exam has become a very popular test in the IT industry, but in order to pass the exam you need to spend a lot of time and effort to master relevant IT professional knowledge. If you decide to buy the 350-401 Latest Exam Sample reference materials from our company, we will have special people to advise and support you.
actual 350-401 Latest Exam Sample brain dumps.
CCNP Enterprise 350-401 Latest Exam Sample - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) So their perfection is unquestionable. If you want to be accepted as an indispensable member in your working condition, and obliterate opponents from a great distance, start by using our Valid Exam Cram 350-401 Materials exam prep to pass the Valid Exam Cram 350-401 Materials exam now. Our Valid Exam Cram 350-401 Materials practice engine with passing rate up to 98 percent can build a surely system to elude any kind of loss of you and help you harvest success effortlessly.
Our experts have taken your worries seriously. They have made it easy to operate for all people. Even if you know little about computers, you can easily begin to do exercises of the 350-401 Latest Exam Sample real exam dumps.
Cisco 350-401 Latest Exam Sample - While it is not truth.
Cisco 350-401 Latest Exam Sample authentication certificate is the dream IT certificate of many people. Cisco certification 350-401 Latest Exam Sample exam is a examination to test the examinees' IT professional knowledge and experience, which need to master abundant IT knowledge and experience to pass. In order to grasp so much knowledge, generally, it need to spend a lot of time and energy to review many books. Goldmile-Infobiz is a website which can help you save time and energy to rapidly and efficiently master the Cisco certification 350-401 Latest Exam Sample exam related knowledge. If you are interested in Goldmile-Infobiz, you can first free download part of Goldmile-Infobiz's Cisco certification 350-401 Latest Exam Sample exam exercises and answers on the Internet as a try.
They give users access to information and exam, offering simulative testing environment when you participate it like in the classroom. And if you are afraid of the lack experience of the exam, our 350-401 Latest Exam Sample practice engine will be your good choice.
350-401 PDF DEMO:
QUESTION NO: 1
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 2
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 3
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 4
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
Feedbacks of many IT professionals who have passed Cisco certification HashiCorp Vault-Associate-002 exam prove that their successes benefit from Goldmile-Infobiz's help. So it is very necessary for you to try your best to get the Cisco 300-710 certification in a short time. Microsoft AI-900-KR study materials including the official Cisco Microsoft AI-900-KR certification training courses, Cisco Microsoft AI-900-KR self-paced training guide, Microsoft AI-900-KR exam Goldmile-Infobiz and practice, Microsoft AI-900-KR online exam Microsoft AI-900-KR study guide. Microsoft SC-401 - All those versions of usage has been well-accepted by them. APICS CPIM-8.0 - With it, you will be brimming with confidence, fully to do the exam preparation.
Updated: May 28, 2022