We have always been made rapid progress on our 350-401 Latest Learning Material training materials because of the merits of high-efficiency and perfect after-sales services online for 24 hours. Studying with our 350-401 Latest Learning Material actual exam, you can get the most professional information and achieve your dreaming scores by your first go. We can claim that as long as you study with our 350-401 Latest Learning Material exam guide for 20 to 30 hours, you will pass your 350-401 Latest Learning Material exam confidently. Therefore, getting the test 350-401 Latest Learning Material certification is of vital importance to our future employment. And the 350-401 Latest Learning Material study tool can provide a good learning platform for users who want to get the test 350-401 Latest Learning Material certification in a short time. Many customers claimed that our study materials made them at once enlightened after using them for review.
CCNP Enterprise 350-401 Our staff will help you with genial attitude.
So our study materials are helpful to your preparation of the 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Latest Learning Material exam. Some candidates may considerate whether the 350-401 New Exam Cram Materials exam guide is profession, but it can be sure that the contents of our study materials are compiled by industry experts after them refining the contents of textbooks, they have good knowledge of exam. 350-401 New Exam Cram Materials test questions also has an automatic scoring function, giving you an objective rating after you take a mock exam to let you know your true level.
In the end, you will become an excellent talent. As you know, the 350-401 Latest Learning Material certificate is hard to get for most people. But our 350-401 Latest Learning Material study guide will offer you the most professional guidance.
Cisco 350-401 Latest Learning Material - As old saying goes, all roads lead to Rome.
Many people worry about buying electronic products on Internet, like our 350-401 Latest Learning Material preparation quiz, we must emphasize that our 350-401 Latest Learning Material simulating materials are absolutely safe without viruses, if there is any doubt about this after the pre-sale, we provide remote online guidance installation of our 350-401 Latest Learning Material exam practice. It is worth noticing that some people who do not use professional anti-virus software will mistakenly report the virus.
You need to reserve our installation packages of our 350-401 Latest Learning Material learning guide in your flash disks. Then you can go to everywhere without carrying your computers.
350-401 PDF DEMO:
QUESTION NO: 1
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 2
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 3
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 4
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 5
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
Microsoft SC-401 - We will simplify the complex concepts by adding diagrams and examples during your study. With easy payment and thoughtful, intimate after-sales service, believe that our VMware 2V0-17.25 exam dumps will not disappoint users. That would save lots of your time, and you’ll be more likely to satisfy with our DASCA SDS test guide. First of all, we have the best and most first-class operating system, in addition, we also solemnly assure users that users can receive the information from the Salesforce Marketing-Cloud-Administrator certification guide within 5-10 minutes after their payment. We guarantee that you can enjoy the premier certificate learning experience under our help with our Microsoft DP-900-KR prep guide since we put a high value on the sustainable relationship with our customers.
Updated: May 28, 2022