On the one hand, our company hired the top experts in each qualification examination field to write the 350-401 Latest Study Guide prepare dump, so as to ensure that our products have a very high quality, so that users can rest assured that the use of our research materials. On the other hand, under the guidance of high quality research materials, the rate of adoption of the 350-401 Latest Study Guide exam guide is up to 98% to 100%. Of course, it is necessary to qualify for a qualifying exam, but more importantly, you will have more opportunities to get promoted in the workplace. The content and displays of the 350-401 Latest Study Guide pass guide Which they have tailor-designed are absolutely more superior than the other providers'. Besides, they update our 350-401 Latest Study Guide real exam every day to make sure that our customer can receive the latest 350-401 Latest Study Guide preparation brain dumps. Anyway, what I want to tell you that our 350-401 Latest Study Guide exam questions can really help you pass the exam faster.
CCNP Enterprise 350-401 When we choose job, job are also choosing us.
Our experts have worked hard for several years to formulate 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Latest Study Guide exam braindumps for all examiners. Next, I will introduce you to the most representative advantages of New 350-401 Exam Questions Vce real exam. You can think about whether these advantages are what you need!
After the payment for our 350-401 Latest Study Guide exam materials is successful, you will receive an email from our system within 5-10 minutes; then, click on the link to log on and you can use 350-401 Latest Study Guide preparation materials to study immediately. In fact, you just need spend 20~30h effective learning time if you match 350-401 Latest Study Guide guide dumps and listen to our sincere suggestions. Then you will have more time to do something else you want.
Cisco 350-401 Latest Study Guide - It will be a first step to achieve your dreams.
After undergoing a drastic change over these years, our 350-401 Latest Study Guide actual exam have been doing perfect job in coping with the exam. Up to now our 350-401 Latest Study Guide practice materials account for 60 percent of market share in this line for their efficiency and accuracy when dealing with the exam. With the best reputation in the market our 350-401 Latest Study Guide training materials can help you ward off all unnecessary and useless materials and spend all your limited time on practicing most helpful questions.
So there is nothing to worry about, just buy our 350-401 Latest Study Guide exam questions. It is our consistent aim to serve our customers wholeheartedly.
350-401 PDF DEMO:
QUESTION NO: 1
Which statement explains why Type 1 hypervisor is considered more efficient than Type 2 hypervisor?
A. Type 1 hypervisor enables other operating systems to run on it
B. Type 1 hypervisor runs directly on the physical hardware of the host machine without relying on the underlying OS
C. Type 1 hypervisor relics on the existing OS of the host machine to access CPU, memory, storage, and network resources.
D. Type 1 hypervisor is the only type of hypervisor that supports hardware acceleration techniques
Answer: B
Explanation:
There are two types of hypervisors: type 1 and type 2 hypervisor.
In type 1 hypervisor (or native hypervisor), the hypervisor is installed directly on the physical server.
Then instances of an operating system (OS) are installed on the hypervisor. Type 1 hypervisor has direct access to the hardware resources. Therefore they are more efficient than hosted architectures.
Some examples of type 1 hypervisor are VMware vSphere/ESXi, Oracle VM Server, KVM and
Microsoft Hyper-V.
In contrast to type 1 hypervisor, a type 2 hypervisor (or hosted hypervisor) runs on top of an operating system and not the physical hardware directly. A big advantage of Type 2 hypervisors is that management console software is not required.
QUESTION NO: 2
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
QUESTION NO: 3
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 4
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 5
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
We have tens of thousands of supporters around the world eager to pass the exam with our Microsoft SC-900 learning guide which are having a steady increase on the previous years. If you buy our ASIS PSP exam questions, then you will find that Our ASIS PSP actual exam has covered all the knowledge that must be mastered in the exam. Any changes taking place in the environment and forecasting in the next CIPS L5M6 exam will be compiled earlier by them. So, please give the IBM C1000-204 study materials a chance to help you. In order to meet the needs of all customers, Our CheckPoint 156-315.82 study torrent has a long-distance aid function.
Updated: May 28, 2022