We can assure you that you will get the latest version of our 350-401 Latest Test Cost training materials for free from our company in the whole year after payment. For we promise to give all of our customers one year free updates of our 350-401 Latest Test Cost exam questions and we update our 350-401 Latest Test Cost study guide fast and constantly. Do not miss the opportunity to buy the best 350-401 Latest Test Cost preparation questions in the international market which will also help you to advance with the times. After you purchase our 350-401 Latest Test Cost study guide, you can make the best use of your spare time to update your knowledge. For we have three varied versions of our 350-401 Latest Test Cost learning questions for you to choose so that you can study at differents conditions. The software of our 350-401 Latest Test Cost test torrent provides the statistics report function and help the students find the weak links and deal with them.
CCNP Enterprise 350-401 Moreover, we have Demos as freebies.
CCNP Enterprise 350-401 Latest Test Cost - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Passed the certification exam you will get to a good rise. We believe that you will like our products. According to the different demands from customers, the experts and professors designed three different versions for all customers.
The certification of Cisco 350-401 Latest Test Cost exam is what IT people want to get. Because it relates to their future fate. Cisco 350-401 Latest Test Cost exam training materials are the learning materials that each candidate must have.
Cisco 350-401 Latest Test Cost - What should we do? It doesn't matter.
Our 350-401 Latest Test Cost preparation practice are highly targeted and have a high hit rate, there are a lot of learning skills and key points in the exam, even if your study time is very short, you can also improve your 350-401 Latest Test Cost exam scores very quickly. Even if you have a week foundation, I believe that you will get the certification by using our 350-401 Latest Test Cost study materials. We can claim that with our 350-401 Latest Test Cost practice engine for 20 to 30 hours, you will be ready to pass the exam with confidence.
To prepare for 350-401 Latest Test Cost exam, you do not need read a pile of reference books or take more time to join in related training courses, what you need to do is to make use of our Goldmile-Infobiz exam software, and you can pass the exam with ease. Our exam dumps can not only help you reduce your pressure from 350-401 Latest Test Cost exam preparation, but also eliminate your worry about money waste.
350-401 PDF DEMO:
QUESTION NO: 1
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 2
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 3
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
VMware 2V0-13.25 - All in all, abandon all illusions and face up to reality bravely. The Microsoft MS-900-KR exam certification is an important evidence of your IT skills, which plays an important role in your IT career. Not only we offer the best Linux Foundation CKS training prep, but also our sincere and considerate attitude is praised by numerous of our customers. Without complex collection work and without no such long wait, you can get the latest and the most trusted Axis ANVE exam materials on our website. You will come across almost all similar questions in the real SAP C-S4CS-2508 exam.
Updated: May 28, 2022