Our 350-401 Latest Test Experience learning guide is very efficient tool for in our modern world, everyone is looking for to do things faster and better so it is no wonder that productivity hacks are incredibly popular. So we must be aware of the importance of the study tool. In order to promote the learning efficiency of our customers, our 350-401 Latest Test Experience training materials were designed by a lot of experts from our company. Our 350-401 Latest Test Experience study torrent specially proposed different versions to allow you to learn not only on paper, but also to use mobile phones to learn. This greatly improves the students' availability of fragmented time to study our 350-401 Latest Test Experience learning guide. We are selling virtual 350-401 Latest Test Experience learning dumps, and the order of our 350-401 Latest Test Experience training materials will be immediately automatically sent to each purchaser's mailbox according to our system.
CCNP Enterprise 350-401 And you can choose the favorite one.
CCNP Enterprise 350-401 Latest Test Experience - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Our study tool can meet your needs. Many exam candidates are uninformed about the fact that our 350-401 Exam Duration preparation materials can help them with higher chance of getting success than others. It is all about efficiency and accuracy.
During the exam, you would be familiar with the questions, which you have practiced in our 350-401 Latest Test Experience question dumps. That’s the reason why most of our customers always pass exam easily. Our reliable 350-401 Latest Test Experience question dumps are developed by our experts who have rich experience in the fields.
Cisco 350-401 Latest Test Experience - Hesitation will not generate good results.
Success is has method. You can be successful as long as you make the right choices. Goldmile-Infobiz's Cisco 350-401 Latest Test Experience exam training materials are tailored specifically for IT professionals. It can help you pass the exam successfully. If you're still catching your expertise to prepare for the exam, then you chose the wrong method. This is not only time-consuming and laborious, but also is likely to fail. But the remedy is not too late, go to buy Goldmile-Infobiz's Cisco 350-401 Latest Test Experience exam training materials quickly. With it, you will get a different life. Remember, the fate is in your own hands.
The fact is that they never insist on one thing and give up quickly. Our 350-401 Latest Test Experience study dumps will assist you to overcome your shortcomings and become a persistent person.
350-401 PDF DEMO:
QUESTION NO: 1
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 2
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
QUESTION NO: 3
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
Goldmile-Infobiz of Cisco Oracle N16300GC10 exam materials is the source of your success. Our PCA CSDB study materials are written by experienced experts in the industry, so we can guarantee its quality and efficiency. Construction Specifications Institute CDT - Of course, when you are seeking for exam materials, it is certain that you will find many different materials. Through the practice of our Microsoft MD-102 exam questions, you can grasp the intention of the examination organization accurately. Goldmile-Infobiz Microsoft PL-300-KR braindump has a high hit rate.
Updated: May 28, 2022