After you know about our 350-401 Latest Test Name actual questions, you can decide to buy it or not. The process is quiet simple, all you need to do is visit our website and download the free demo. That would save lots of your time, and you’ll be more likely to satisfy with our 350-401 Latest Test Name test guide. Second, once we have written the latest version of the 350-401 Latest Test Namecertification guide, our products will send them the latest version of the 350-401 Latest Test Name test practice question free of charge for one year after the user buys the product. Last but not least, our perfect customer service staff will provide users with the highest quality and satisfaction in the hours. We guarantee that you can enjoy the premier certificate learning experience under our help with our 350-401 Latest Test Name prep guide since we put a high value on the sustainable relationship with our customers.
CCNP Enterprise 350-401 So there is no matter of course.
CCNP Enterprise 350-401 Latest Test Name - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) If you are not working hard, you will lose a lot of opportunities! In traditional views, Reliable Exam 350-401 Questions Fee practice materials need you to spare a large amount of time on them to accumulate the useful knowledge may appearing in the real exam. However, our Reliable Exam 350-401 Questions Fee learning questions are not doing that way.
Combined with your specific situation and the characteristics of our 350-401 Latest Test Name exam questions, our professional services will recommend the most suitable version of 350-401 Latest Test Name study materials for you. We introduce a free trial version of the 350-401 Latest Test Name learning guide because we want users to see our sincerity. 350-401 Latest Test Name exam prep sincerely hopes that you can achieve your goals and realize your dreams.
Cisco 350-401 Latest Test Name - In short, we live in an age full of challenges.
We are amenable to offer help by introducing our 350-401 Latest Test Name real exam materials and they can help you pass the Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) practice exam efficiently. All knowledge is based on the real exam by the help of experts. By compiling the most important points of questions into our 350-401 Latest Test Name guide prep our experts also amplify some difficult and important points. There is no doubt they are clear-cut and easy to understand to fulfill your any confusion about the exam. Our Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) exam question is applicable to all kinds of exam candidates who eager to pass the exam. Last but not the least, they help our company develop brand image as well as help a great deal of exam candidates pass the exam with passing rate over 98 percent of our 350-401 Latest Test Name real exam materials.
We believe that you must have paid more attention to the pass rate of the Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) exam questions. If you focus on the study materials from our company, you will find that the pass rate of our products is higher than other study materials in the market, yes, we have a 99% pass rate, which means if you take our the 350-401 Latest Test Name study dump into consideration, it is very possible for you to pass your exam and get the related certification.
350-401 PDF DEMO:
QUESTION NO: 1
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 2
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 3
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 4
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
Microsoft MS-700 - Because our study material is prepared strictly according to the exam outline by industry experts, whose purpose is to help students pass the exam smoothly. Respect the user's choice, will not impose the user must purchase the Adobe AD0-E117 practice materials. Cisco 300-835 - Our experts have many years’ experience in this particular line of business, together with meticulous and professional attitude towards jobs. Linux Foundation CNPA - Believe that there is such a powerful expert help, our users will be able to successfully pass the qualification test to obtain the qualification certificate. Our Huawei H25-611_V1.0 practice questions enjoy great popularity in this line.
Updated: May 28, 2022