If you have made up your mind to get respect and power, the first step you need to do is to get the 350-401 Latest Test Question certification, because the certification is a reflection of your ability. If you have the 350-401 Latest Test Question certification, it will be easier for you to get respect and power. Our company happened to be designing the 350-401 Latest Test Question exam question. As job seekers looking for the turning point of their lives, it is widely known that the workers of recruitment is like choosing apples---viewing resumes is liking picking up apples, employers can decide whether candidates are qualified by the 350-401 Latest Test Question appearances, or in other words, candidates’ educational background and relating 350-401 Latest Test Question professional skills. Knowledge about a person and is indispensable in recruitment. Our 350-401 Latest Test Question practice materials integrating scientific research of materials, production of high quality 350-401 Latest Test Question training engine and considerate after-sales services have help us won a prominent position in the field of materials.
CCNP Enterprise 350-401 You won’t regret your decision of choosing us.
CCNP Enterprise 350-401 Latest Test Question - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) They have the same questions and answers but with different using methods. Experts left notes for your reference, and we believe with their notes things will be easier. In addition, the new supplementary will be sent to your mailbox if you place order this time with beneficial discounts at intervals.
We often ask, what is the purpose of learning? Why should we study? Why did you study for 350-401 Latest Test Questionexam so long? As many people think that, even if one day we forget the formula for the area of a triangle, we can still live very well, but if it were not for the knowledge of learning 350-401 Latest Test Question exam and try to obtain certification, how can we have the opportunity to good to future life? So, the examination is necessary, only to get the test 350-401 Latest Test Question certification, get a certificate, to prove better us, to pave the way for our future life.
Cisco 350-401 Latest Test Question - Do not reject learning new things.
350-401 Latest Test Question test questions have so many advantages that basically meet all the requirements of the user. If you have good comments or suggestions during the trial period, you can also give us feedback in a timely manner. Our study materials will give you a benefit as Thanks, we do it all for the benefits of the user. 350-401 Latest Test Question study materials look forward to your joining in.
It is also known to us that passing the exam is not an easy thing for many people, so a good study method is very important for a lot of people, in addition, a suitable study tool is equally important, because the good and suitable 350-401 Latest Test Question reference guide can help people pass the exam in a relaxed state. We are glad to introduce the 350-401 Latest Test Question certification dumps from our company to you.
350-401 PDF DEMO:
QUESTION NO: 1
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 2
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 3
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 4
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
Amazon SOA-C03 - You can improve your confidence in the exam by learning about real exams through our free demo. In order to meet the different demands of the different customers, these experts from our company have designed three different versions of the Medical Tests PTCE reference guide. VMware 250-612 - If you haven't found the right materials yet, please don't worry. Our Huawei H19-492_V1.0 exam prep has gained wide popularity among candidates. Fortinet FCP_FGT_AD-7.6 - As we all know, the pace of life is quickly in the modern society.
Updated: May 28, 2022