Imagine how much chance you will get on your career path after obtaining an internationally certified 350-401 New Dumps Free certificate! You will get a better job or get a big rise on the position as well as the salary. And we can claim that if you study with our 350-401 New Dumps Free study materials for 20 to 30 hours, you will pass the exam with ease. They are in fact meant to provide you the opportunity to revise your learning and overcome your 350-401 New Dumps Free exam fear by repeating the practice tests as many times as you can. Preparation for 350-401 New Dumps Free exam using our 350-401 New Dumps Free exam materials are sure to help you obtain your targeted percentage too. As you may know that we have three different 350-401 New Dumps Free exam questions which have different advantages for you to choose.
CCNP Enterprise 350-401 So we understand your worries.
Goldmile-Infobiz can satisfy the fundamental demands of candidates with concise layout and illegible outline of our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) New Dumps Free exam questions. At the moment when you decided to choose our New 350-401 Exam Online real dumps, we feel the responsibility to be with you during your journey to prepare for the New 350-401 Exam Online exam. So we clearly understand our duty to offer help in this area.
Although our 350-401 New Dumps Free practice materials are reasonably available, their value is in-estimate. We offer hearty help for your wish of certificate of the 350-401 New Dumps Free exam. Our company is open-handed to offer benefits at intervals, with 350-401 New Dumps Free learning questions priced with reasonable prices.
Cisco 350-401 New Dumps Free - Our sales volumes are beyond your imagination.
The latest 350-401 New Dumps Free exam torrent covers all the qualification exam simulation questions in recent years, including the corresponding matching materials at the same time. Do not have enough valid 350-401 New Dumps Free practice materials, can bring inconvenience to the user, such as the delay progress, learning efficiency and to reduce the learning outcome was not significant, these are not conducive to the user persistent finish learning goals. Therefore, to solve these problems, the 350-401 New Dumps Free test material is all kinds of qualification examination, the content of the difficult point analysis, let users in the vast amounts of find the information you need in the study materials, the 350-401 New Dumps Free practice materials improve the user experience, to lay the foundation for good grades through qualification exam.
It will play a multiplier effect to help you pass the exam. If you still desperately cram knowledge and spend a lot of precious time and energy to prepare for passing Cisco certification 350-401 New Dumps Free exam, and at the same time do not know how to choose a more effective shortcut to pass Cisco certification 350-401 New Dumps Free exam.
350-401 PDF DEMO:
QUESTION NO: 1
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 2
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 3
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 4
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
Our ISACA AAIA test practice guide’ self-learning and self-evaluation functions, the statistics report function, the timing function and the function of stimulating the test could assist you to find your weak links, check your level, adjust the speed and have a warming up for the real exam. Fortinet FCP_FAZ_AN-7.6 - Goldmile-Infobiz can also promise if you fail to pass the exam, Goldmile-Infobiz will 100% refund. Now, our CWNP CWNA-109 exam questions just need you to spend some time on accepting our guidance, then you will become popular talents in the job market. Goldmile-Infobiz's practice questions and answers about the Cisco certification SAP C_ARCON_2508 exam is developed by our expert team's wealth of knowledge and experience, and can fully meet the demand of Cisco certification SAP C_ARCON_2508 exam's candidates. We have specific workers to be responsible for answering customers’ consultation about the SAP C-ARCON-2508 learning materials.
Updated: May 28, 2022