Many candidates proved it does 100% pass the exam. With it, you will reach your goal, and can get the best results. If you want to achieve maximum results with minimum effort in a short period of time, and want to pass the Cisco 350-401 Real Exam Questions exam. What we are doing now is incredible form of a guarantee. Goldmile-Infobiz guarantee passing rate of 100%, you use your Cisco 350-401 Real Exam Questions exam to try our Cisco 350-401 Real Exam Questions training products, this is correct, we can guarantee your success. This is the advice to every IT candidate, and hope you can reach your dream of paradise.
CCNP Enterprise 350-401 A bad situation can show special integrity.
Different person has different goals, but our Goldmile-Infobiz aims to help you successfully pass 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Real Exam Questions exam. If a person is strong-willed, it is close at hand. I think you should be such a person.
We can be along with you in the development of IT industry. Give you a helping hand. Probably many people have told you how difficult the 350-401 Real Exam Questions exam is; however, our Goldmile-Infobiz just want to tell you how easy to pass 350-401 Real Exam Questions exam.
Cisco 350-401 Real Exam Questions - Sometimes choice is greater than important.
Goldmile-Infobiz Cisco 350-401 Real Exam Questions practice test dumps can help you pass IT certification exam in a relaxed manner. In addition, if you first take the exam, you can use software version dumps. Because the SOFT version questions and answers completely simulate the actual exam. You can experience the feeling in the actual test in advance so that you will not feel anxious in the real exam. After you use the SOFT version, you can take your exam in a relaxed attitude which is beneficial to play your normal level.
The contents of 350-401 Real Exam Questions free download pdf will cover the 99% important points in your actual test. In case you fail on the first try of your exam with our 350-401 Real Exam Questions free practice torrent, we will give you a full refund on your purchase.
350-401 PDF DEMO:
QUESTION NO: 1
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 2
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 3
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 4
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 5
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
Palo Alto Networks PCNSE - With Goldmile-Infobiz real questions and answers, when you take the exam, you can handle it with ease and get high marks. The smartest way of getting high passing score in Huawei H19-491_V1.0 valid test is choosing latest and accurate certification learning materials. Our Fortinet FCP_FAZ_AN-7.6 exam software offers comprehensive and diverse questions, professional answer analysis and one-year free update service after successful payment; with the help of our Fortinet FCP_FAZ_AN-7.6 exam software, you can improve your study ability to obtain Fortinet FCP_FAZ_AN-7.6 exam certification. Our website always checks the update of Amazon SAP-C02 test questions to ensure the accuracy of our study materials and keep the most up-to-dated exam requirements. IIA IIA-CIA-Part2-CN - In order to reduce more stress for you, we promise you if you fail the exam, what you need to do is to send your scanned unqualified transcripts to our email box.
Updated: May 28, 2022