We can make sure that all employees in our company have wide experience and advanced technologies in designing the 350-401 Sample Questions Pdf study dump. So a growing number of the people have used our study materials in the past years, and it has been a generally acknowledged fact that the quality of the 350-401 Sample Questions Pdf test guide from our company is best in the study materials market. Now we would like to share the advantages of our 350-401 Sample Questions Pdf study dump to you, we hope you can spend several minutes on reading our introduction; you will benefit a lot from it. With our 350-401 Sample Questions Pdf learning questions, you will find that passing the exam is as easy as pie for our 350-401 Sample Questions Pdf study materials own 100% pass guarantee. Only by practising our 350-401 Sample Questions Pdf exam braindumps on a regular base, you will see clear progress happened on you. Our 350-401 Sample Questions Pdf study materials can have such a high pass rate, and it is the result of step by step that all members uphold the concept of customer first.
At present, Cisco 350-401 Sample Questions Pdf exam is very popular.
The results of your 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Sample Questions Pdf exam will be analyzed and a statistics will be presented to you. As long as you master these questions and answers, you will sail through the exam you want to attend. Whatever exam you choose to take, Goldmile-Infobiz training dumps will be very helpful to you.
So it is convenient for you to have a good understanding of our product before you decide to buy our 350-401 Sample Questions Pdf training materials. Before the clients buy our 350-401 Sample Questions Pdf guide prep they can have a free download and tryout. The client can visit the website pages of our product and understand our 350-401 Sample Questions Pdf study materials in detail.
Cisco 350-401 Sample Questions Pdf - Now, everything is different.
If you want to pass Cisco 350-401 Sample Questions Pdf exam and get a high paying job in the industry; if you are searching for the perfect 350-401 Sample Questions Pdf exam prep material to get your dream job, then you must consider using our Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) exam products to improve your skillset. We have curated new 350-401 Sample Questions Pdf questions answers to help you prepare for the exam. It can be your golden ticket to pass the Cisco 350-401 Sample Questions Pdf test on the first attempt. We are providing latest 350-401 Sample Questions Pdf PDF question answers to help you prepare exam while working in the office to save your time.
Take away your satisfied 350-401 Sample Questions Pdf preparation quiz and begin your new learning journey. You will benefit a lot after you finish learning our 350-401 Sample Questions Pdf study materials just as our other loyal customers.
350-401 PDF DEMO:
QUESTION NO: 1
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 2
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 3
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 4
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
Our Microsoft SC-401 study materials are excellent examination review products composed by senior industry experts that focuses on researching the mock examination products which simulate the real Microsoft SC-401 test environment. However, how to choose the best and suitable study materials for yourself in a short time? It is very difficult for a lot of people to do a correct choice, especially these people who have no any experience about the Cisco 300-415 exam. The Pennsylvania Real Estate Commission RePA_Sales_S exam questions are divided into various groups and the candidate can solve these questions to test his skills and knowledge. ACAMS CAMS - Then it is time for others to envy your luxury life. If you are a novice, begin from ACFE CFE-Investigation study guide and revise your learning with the help of testing engine.
Updated: May 28, 2022