The latest 350-401 Test Camp Sheet exam review materials offered by our Goldmile-Infobiz will help you complete the 350-401 Test Camp Sheet exam preparation in short time. We have the authority of the exam materials and experienced team with rich sense of responsibility. All that we have done is just to help you easily pass the 350-401 Test Camp Sheet exam. Our company has spent more than 10 years on compiling 350-401 Test Camp Sheet study materials for the exam in this field, and now we are delighted to be here to share our 350-401 Test Camp Sheet learnign guide with all of the candidates for the exam in this field. There are so many striking points of our 350-401 Test Camp Sheet preparation exam. We also hope our 350-401 Test Camp Sheet exam materials can help more ambitious people pass 350-401 Test Camp Sheet exam.
CCNP Enterprise 350-401 Then you will be confident in the actual test.
The 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Test Camp Sheet quiz torrent we provide is compiled by experts with profound experiences according to the latest development in the theory and the practice so they are of great value. The secret of success is constancy to purpose. If your purpose is passing exams and getting a certification.
The new supplemental updates will be sent to your mailbox if there is and be free. Because we promise to give free update of our 350-401 Test Camp Sheet learning materials for one year to all our customers. Generally speaking, you can achieve your basic goal within a week with our 350-401 Test Camp Sheet study guide.
Cisco 350-401 Test Camp Sheet - We have benefited a lot from those changes.
The 350-401 Test Camp Sheet practice questions that are best for you will definitely make you feel more effective in less time. The cost of 350-401 Test Camp Sheet studying materials is really very high. Selecting our study materials is definitely your right decision. Of course, you can also make a decision after using the trial version. With our 350-401 Test Camp Sheet real exam, we look forward to your joining. And our 350-401 Test Camp Sheet exam braindumps will never let you down.
In our software version of the 350-401 Test Camp Sheet exam dumps, the unique point is that you can take part in the practice test before the real 350-401 Test Camp Sheet exam. You never know what you can get till you try.
350-401 PDF DEMO:
QUESTION NO: 1
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 2
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 3
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 4
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
There is a lot of data to prove that our CompTIA DS0-001 practice guide has achieved great success. Under the instruction of our Oracle N16300GC10 test prep, you are able to finish your task in a very short time and pass the exam without mistakes to obtain the Cisco certificate. Huawei H31-311_V2.5 - Only when we have enough qualifications to prove our ability can we defeat our opponents in the harsh reality. So our The Open Group OGEA-103 study braindumps are a valuable invest which cost only tens of dollars but will bring you permanent reward. Microsoft AB-900 - You may have gone through a lot of exams.
Updated: May 28, 2022