Some candidates may considerate whether the 350-401 Test Dumps Sheet exam guide is profession, but it can be sure that the contents of our study materials are compiled by industry experts after them refining the contents of textbooks, they have good knowledge of exam. 350-401 Test Dumps Sheet test questions also has an automatic scoring function, giving you an objective rating after you take a mock exam to let you know your true level. At the same time, 350-401 Test Dumps Sheet exam torrent will also help you count the type of the wrong question, so that you will be more targeted in the later exercises and help you achieve a real improvement. In the end, you will easily pass the 350-401 Test Dumps Sheet exam through our assistance. Then you will find that your work ability is elevated greatly by studying our 350-401 Test Dumps Sheet actual exam. We provide not only the free download and try out of the 350-401 Test Dumps Sheet practice guide but also the immediate download after your purchase successfully.
CCNP Enterprise 350-401 You live so tired now.
Many people worry about buying electronic products on Internet, like our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Test Dumps Sheet preparation quiz, we must emphasize that our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Test Dumps Sheet simulating materials are absolutely safe without viruses, if there is any doubt about this after the pre-sale, we provide remote online guidance installation of our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Test Dumps Sheet exam practice. You need to reserve our installation packages of our Reliable Test 350-401 Cram Sheet File learning guide in your flash disks. Then you can go to everywhere without carrying your computers.
Our 350-401 Test Dumps Sheet test material can help you focus and learn effectively. You don't have to worry about not having a dedicated time to learn every day. You can learn our 350-401 Test Dumps Sheet exam torrent in a piecemeal time, and you don't have to worry about the tedious and cumbersome learning content.
Cisco 350-401 Test Dumps Sheet - So there is no matter of course.
Do you want to get a better job or a higher income? If the answer is yes, then you should buy our 350-401 Test Dumps Sheet exam questions for our 350-401 Test Dumps Sheet study materials can help you get what you want. Go against the water and retreat if you fail to enter. The pressure of competition is so great now. If you are not working hard, you will lose a lot of opportunities! There is no time, quickly purchase 350-401 Test Dumps Sheet study materials, pass the exam! Come on!
In traditional views, 350-401 Test Dumps Sheet practice materials need you to spare a large amount of time on them to accumulate the useful knowledge may appearing in the real exam. However, our 350-401 Test Dumps Sheet learning questions are not doing that way.
350-401 PDF DEMO:
QUESTION NO: 1
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 2
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 3
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 5
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
Salesforce Service-Cloud-Consultant exam prep sincerely hopes that you can achieve your goals and realize your dreams. Network Appliance NS0-076 - And we have become a famous brand for we have engaged in this career. The existence of our Amazon SAP-C02 learning guide is regarded as in favor of your efficiency of passing the exam. The profession of our experts is expressed in our SAP C_ARSUM_2508 training prep thoroughly. EMC D-PWF-DS-01 - And we will send you the new updates if our experts make them freely.
Updated: May 28, 2022