With great outcomes of the passing rate upon to 98-100 percent, our 350-401 Test Questions Vce practice engine is totally the perfect ones. We never boost our achievements on our 350-401 Test Questions Vce exam questions, and all we have been doing is trying to become more effective and perfect as your first choice, and determine to help you pass the 350-401 Test Questions Vce study materials as efficient as possible. Just to try on our 350-401 Test Questions Vce training guide, and you will love it. If you are suspicious of our 350-401 Test Questions Vce exam questions, you can download the free demo from our official websites. Our 350-401 Test Questions Vce training materials have won great success in the market. So instead of focusing on the high quality 350-401 Test Questions Vce latest material only, our staff is genial and patient to your questions of our 350-401 Test Questions Vce real questions.
CCNP Enterprise 350-401 The first one is downloading efficiency.
Our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Test Questions Vce study material always regards helping students to pass the exam as it is own mission. We understand your drive of the certificate, so you have a focus already and that is a good start. The sources and content of our 350-401 Real Questions practice dumps are all based on the real 350-401 Real Questions exam.
There may be customers who are concerned about the installation or use of our 350-401 Test Questions Vce training questions. You don't have to worry about this if you have any of this kind of trouble. In addition to high quality and high efficiency of our 350-401 Test Questions Vce exam questions, considerate service is also a big advantage of our company.
Cisco 350-401 Test Questions Vce - How rare a chance is.
Our 350-401 Test Questions Vce exam guide is suitable for everyone whether you are a business man or a student, because you just need 20-30 hours to practice it that you can attend to your exam. There is no doubt that you can get a great grade. If you follow our learning pace, you will get unexpected surprises. Only when you choose our 350-401 Test Questions Vce guide torrent will you find it easier to pass this significant examination and have a sense of brand new experience of preparing the 350-401 Test Questions Vce exam.
It is undeniable that a secure investment can bring many benefits to candidates who want to pass the 350-401 Test Questions Vce exam, without worrying that their money is wasted on useless exam materials, and the most important thing is to pass 350-401 Test Questions Vce exams. In addition, after the purchase, the candidate will be entitled to a one-year free update, which will help the candidate keep the latest news feeds, and will not leave any opportunity that may lead them to fail the 350-401 Test Questions Vce exam.
350-401 PDF DEMO:
QUESTION NO: 1
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 2
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 3
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 4
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 5
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
Our company has been putting emphasis on the development and improvement of Nursing AANP-FNP test prep over ten year without archaic content at all. And at this point, our VMware 3V0-21.25 study materials do very well. If you do not have extraordinary wisdom, do not want to spend too much time on learning, but want to reach the pinnacle of life through ACAMS CAMS7-KR exam, then you must have ACAMS CAMS7-KR question torrent. To make sure that our EMC D-ECS-DY-23 training braindumps are the best on matter on the content or on the displays, we invite volunteers to experience our EMC D-ECS-DY-23 real exam before selling to customers. Our Network Appliance NS0-094 study materials are easy to be mastered and boost varied functions.
Updated: May 28, 2022