Our Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) exam prep has taken up a large part of market. with decided quality to judge from customers' perspective, If you choose the right 350-401 Valid Exam Blueprint practice braindumps, it will be a wise decision. Our behavior has been strictly ethical and responsible to you, which is trust worthy. I strongly believe that you can feel the sincerity and honesty of our company, since we are confident enough to give our customers a chance to test our 350-401 Valid Exam Blueprint preparation materials for free before making their decision. and you will find out the unique charm of our 350-401 Valid Exam Blueprint actual exam. The Cisco 350-401 Valid Exam Blueprint exam questions aid its customers with updated and comprehensive information in an innovative style.
CCNP Enterprise 350-401 Each of your progress is our driving force.
If you have any questions about the 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Valid Exam Blueprint learning dumps, do not hesitate and ask us in your anytime, we are glad to answer your questions and help you use our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Valid Exam Blueprint study questions well. All Valid Braindumps 350-401 Ppt practice questions you should know are written in them with three versions to choose from: the PDF, the Software and the APP online. At the same time, the experts who compiled the Valid Braindumps 350-401 Ppt learning engine are assiduously over so many years in this filed.
In addition, the 350-401 Valid Exam Blueprint exam dumps system from our company can help all customers ward off network intrusion and attacks prevent information leakage, protect user machines network security. If you choose our 350-401 Valid Exam Blueprint study questions as your study tool, we can promise that we will try our best to enhance the safety guarantees and keep your information from revealing, and your privacy will be protected well. You can rest assured to buy the 350-401 Valid Exam Blueprint exam dumps from our company.
Cisco 350-401 Valid Exam Blueprint - This certification gives us more opportunities.
Many exam candidates feel hampered by the shortage of effective 350-401 Valid Exam Blueprint preparation quiz, and the thick books and similar materials causing burden for you. Serving as indispensable choices on your way of achieving success especially during this 350-401 Valid Exam Blueprint exam, more than 98 percent of candidates pass the exam with our 350-401 Valid Exam Blueprint training guide and all of former candidates made measurable advance and improvement.
Therefore, modern society is more and more pursuing efficient life, and our 350-401 Valid Exam Blueprint exam materials are the product of this era, which conforms to the development trend of the whole era. It seems that we have been in a state of study and examination since we can remember, and we have experienced countless tests, including the qualification examinations we now face.
350-401 PDF DEMO:
QUESTION NO: 1
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 2
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 3
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 4
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
Program, you can enjoy our Fortinet FCSS_SDW_AR-7.4 test material service. Huawei H25-721_V1.0 - If you make up your mind, choose us! Our Microsoft DP-100 exam braindumps are the hard-won fruit of our experts with their unswerving efforts in designing products and choosing test questions. All of Oracle N16291GC10 learning materials do this to allow you to solve problems in a pleasant atmosphere while enhancing your interest in learning. APMG-International ISO-IEC-27001-Foundation - In fact, all three versions contain the same questions and answers.
Updated: May 28, 2022