So you do not need to pick out the important points by yourself. Also, our 350-401 Valid Exam Guide practice engine can greatly shorten your preparation time of the exam. So you just need our 350-401 Valid Exam Guide learning questions to help you get the certificate. Our 350-401 Valid Exam Guide actual exam can also broaden your horizon; activate your potential to deal with difficulties. You will not only get desirable goal with our 350-401 Valid Exam Guide exam practice but with superior outcomes that others who dare not imagine. The updated version of the 350-401 Valid Exam Guide study guide will be different from the old version.
Our 350-401 Valid Exam Guide actual test guide can give you some help.
Now we would like to introduce the 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Valid Exam Guide certification guide from our company to you. You can get what you want! You must believe that no matter what you do, as long as you work hard, there is no unsuccessful.
It will be very easy for you to pass the exam and get the certification. More importantly, your will spend less time on preparing for 350-401 Valid Exam Guide exam than other people. The 350-401 Valid Exam Guide learning dumps from our company are very convenient for all people, including the convenient buying process, the download way and the study process and so on.
Cisco 350-401 Valid Exam Guide - Goldmile-Infobiz have a huge senior IT expert team.
Goldmile-Infobiz have the latest Cisco certification 350-401 Valid Exam Guide exam training materials. The industrious Goldmile-Infobiz's IT experts through their own expertise and experience continuously produce the latest Cisco 350-401 Valid Exam Guide training materials to facilitate IT professionals to pass the Cisco certification 350-401 Valid Exam Guide exam. The certification of Cisco 350-401 Valid Exam Guide more and more valuable in the IT area and a lot people use the products of Goldmile-Infobiz to pass Cisco certification 350-401 Valid Exam Guide exam. Through so many feedbacks of these products, our Goldmile-Infobiz products prove to be trusted.
Now please add Goldmile-Infobiz to your shopping cart. If you choose the help of Goldmile-Infobiz, we will spare no effort to help you pass the exam.
350-401 PDF DEMO:
QUESTION NO: 1
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 2
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 3
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 4
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 5
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
Fortinet FCP_FAZ_AD-7.4 - If you fail to pass the exam, Goldmile-Infobiz will full refund to you. Whole Goldmile-Infobiz's pertinence exercises about Cisco certification APICS CPIM-8.0 exam is very popular. In order to pass Cisco certification ServiceNow CIS-HAM exam some people spend a lot of valuable time and effort to prepare, but did not succeed. If you buy Goldmile-Infobiz's Cisco certification RUCKUS RCWA exam practice questions and answers, you can not only pass Cisco certification RUCKUS RCWA exam, but also enjoy a year of free update service. If you choose Goldmile-Infobiz to provide you with the pertinence training, you can easily pass the Cisco certification Microsoft DP-900 exam.
Updated: May 28, 2022