Our professional team checks the update of exam materials every day, so please rest assured that the 350-401 Valid Exam Objectives exam software you are using must contain the latest and most information. We are a team of the exam questions providers 350-401 Valid Exam Objectives exam in internet that ensured you can pass actual test 100%. We have experienced and professional experts to create the latest 350-401 Valid Exam Objectives exam questions and answers many times which are approach to the 350-401 Valid Exam Objectives exam. If you do not get through the exam, you take back your money. The money offer is the best evidence on the remarkable content of 350-401 Valid Exam Objectives. All questions and answers have passed the test of time and are approved by experienced professionals who recommend them as the easiest route to certification testing.
CCNP Enterprise 350-401 People always make excuses for their laziness.
With the help of our hardworking experts, our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Valid Exam Objectives exam braindumps have been on the front-front of this industry and help exam candidates around the world win in valuable time. The countdown time will run until it is time to submit your exercises of the Free 350-401 Exam Questions study materials. Also, it will remind you when the time is soon running out.
350-401 Valid Exam Objectives certifications are thought to be the best way to get good jobs in the high-demanding market. There is a large range of 350-401 Valid Exam Objectives certifications that can help you improve your professional worth and make your dreams come true. Our 350-401 Valid Exam Objectives certification practice materials provide you with a wonderful opportunity to get your dream certification with confidence and ensure your success by your first attempt.
Cisco 350-401 Valid Exam Objectives - So we can predict the real test precisely.
Our 350-401 Valid Exam Objectives preparation exam is compiled specially for it with all contents like exam questions and answers from the real 350-401 Valid Exam Objectives exam. If you make up your mind of our 350-401 Valid Exam Objectives exam prep, we will serve many benefits like failing the first time attached with full refund service, protecting your interests against any kinds of loss. In a word, you have nothing to worry about with our 350-401 Valid Exam Objectives study guide.
Beyond knowing the answer, and actually understanding the 350-401 Valid Exam Objectives test questions puts you one step ahead of the test. Completely understanding a concept and reasoning behind how something works, makes your task second nature.
350-401 PDF DEMO:
QUESTION NO: 1
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 2
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
QUESTION NO: 3
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
If you purchasing our Linux Foundation CGOA simulating questions, you will get a comfortable package services afforded by our considerate after-sales services. And the Software and APP online versions of our APMG-International ISO-IEC-27001-Foundation preparation materials can be practiced on computers or phones. Maybe you have some questions about our CWNP CWAP-405 test torrent when you use our products; it is your right to ask us in anytime and anywhere. Our Microsoft AZ-700-KR training engine is revised by experts and approved by experienced professionals, which simplify complex concepts and add examples, simulations to explain anything that may be difficult to understand. Fortinet NSE5_SSE_AD-7.6 - Because a lot of people long to improve themselves and get the decent job.
Updated: May 28, 2022