The finicky points can be solved effectively by using our 350-401 Valid Exam Online exam questions. With a high pass rate as 98% to 100% in this career, we have been the leader in this market and helped tens of thousands of our loyal customers pass the exams successfully. Just come to buy our 350-401 Valid Exam Online learning guide and you will love it. Our company is a famous company which bears the world-wide influences and our 350-401 Valid Exam Online test prep is recognized as the most representative and advanced study materials among the same kinds of products. Whether the qualities and functions or the service of our product, are leading and we boost the most professional expert team domestically. So accordingly, we offer three versions of free demos for you to download.
CCNP Enterprise 350-401 In short, we live in an age full of challenges.
Last but not the least, they help our company develop brand image as well as help a great deal of exam candidates pass the exam with passing rate over 98 percent of our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Valid Exam Online real exam materials. We believe that you must have paid more attention to the pass rate of the Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) exam questions. If you focus on the study materials from our company, you will find that the pass rate of our products is higher than other study materials in the market, yes, we have a 99% pass rate, which means if you take our the Test 350-401 Engine study dump into consideration, it is very possible for you to pass your exam and get the related certification.
Because our study material is prepared strictly according to the exam outline by industry experts, whose purpose is to help students pass the exam smoothly. As the authoritative provider of 350-401 Valid Exam Online test guide, we always pursue high passing rates compared with our peers to gain more attention from potential customers. In order to gain the trust of new customers, 350-401 Valid Exam Online practice materials provide 100% pass rate guarantee for all purchasers.
Cisco 350-401 Valid Exam Online - As well as our after-sales services.
before making a choice, you can download a trial version of 350-401 Valid Exam Online preparation materials. After you use it, you will have a more complete understanding of this 350-401 Valid Exam Online exam questions. In this way, you can use our 350-401 Valid Exam Online study materials in a way that suits your needs and professional opinions. We hope you will have a great experience with 350-401 Valid Exam Online preparation materials. At the same time, we also hope that you can realize your dreams with our help. We will be honored.
We have tried our best to find all reference books. Then our experts have carefully summarized all relevant materials of the 350-401 Valid Exam Online exam.
350-401 PDF DEMO:
QUESTION NO: 1
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 2
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 3
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 5
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
SAP C-ARSUM-2508 - I believe that you must have your own opinions and requirements in terms of learning. All consumers who are interested in Salesforce Agentforce-Specialist guide materials can download our free trial database at any time by visiting our platform. The Open Group OGBA-101 - We firmly believe that you cannot be an exception. Network Appliance NS0-094 - Therefore, our Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) guide torrent is attributive to high-efficient learning. You will get your hands on the international Salesforce Analytics-Con-301 certificate you want.
Updated: May 28, 2022