If you are not working hard, you will lose a lot of opportunities! There is no time, quickly purchase 350-401 Valid Soft Simulations study materials, pass the exam! Come on! In traditional views, 350-401 Valid Soft Simulations practice materials need you to spare a large amount of time on them to accumulate the useful knowledge may appearing in the real exam. However, our 350-401 Valid Soft Simulations learning questions are not doing that way. 350-401 Valid Soft Simulations exam prep sincerely hopes that you can achieve your goals and realize your dreams.
CCNP Enterprise 350-401 In short, we live in an age full of challenges.
CCNP Enterprise 350-401 Valid Soft Simulations - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) There is no doubt they are clear-cut and easy to understand to fulfill your any confusion about the exam. We believe that you must have paid more attention to the pass rate of the Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) exam questions. If you focus on the study materials from our company, you will find that the pass rate of our products is higher than other study materials in the market, yes, we have a 99% pass rate, which means if you take our the Certification 350-401 Dump study dump into consideration, it is very possible for you to pass your exam and get the related certification.
Because our study material is prepared strictly according to the exam outline by industry experts, whose purpose is to help students pass the exam smoothly. As the authoritative provider of 350-401 Valid Soft Simulations test guide, we always pursue high passing rates compared with our peers to gain more attention from potential customers. In order to gain the trust of new customers, 350-401 Valid Soft Simulations practice materials provide 100% pass rate guarantee for all purchasers.
Cisco 350-401 Valid Soft Simulations - The pass rate is the test of a material.
Add Goldmile-Infobiz's products to cart now! You will have 100% confidence to participate in the exam and disposably pass Cisco certification 350-401 Valid Soft Simulations exam. At last, you will not regret your choice.
Hope you can give our 350-401 Valid Soft Simulations exam questions full trust, we will not disappoint you. And with our 350-401 Valid Soft Simulations study materials, you are bound to pass the exam.
350-401 PDF DEMO:
QUESTION NO: 1
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 2
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 3
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 4
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
Cloud Security Alliance CCSK - Through our short-term special training You can quickly grasp IT professional knowledge, and then have a good preparation for your exam. But our CompTIA XK0-006 study materials have the high pass rate as 98% to 100%, so it is guarantee for you to pass. Salesforce CRT-450 - We will provide one year free update service for those customers who choose Goldmile-Infobiz's products. If you also look forward to change your present boring life, maybe trying your best to have the WGU Information-Technology-Management certification is a good choice for you. Microsoft AI-900 - As most of our exam questions are updated monthly, you will get the best resources with market-fresh quality and reliability assurance.
Updated: May 28, 2022