We have employed a lot of online workers to help all customers solve their problem. If you have any questions about the 350-401 Valid Soft Simulations study materials, do not hesitate and ask us in your anytime, we are glad to answer your questions and help you use our 350-401 Valid Soft Simulations study materials well. We believe our perfect service will make you feel comfortable when you are preparing for your exam. We not only provide you valid 350-401 Valid Soft Simulations exam answers for your well preparation, but also bring guaranteed success results to you. The 350-401 Valid Soft Simulations pass review written by our IT professionals is the best solution for passing the technical and complex certification exam. You will be cast in light of career acceptance and put individual ability to display.
CCNP Enterprise 350-401 People’s tastes also vary a lot.
Our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Valid Soft Simulations study guide is the most reliable and popular exam product in the marcket for we only sell the latest 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Valid Soft Simulations practice engine to our clients and you can have a free trial before your purchase. Professional research data is our online service and it contains simulation training examination and practice questions and answers about Cisco certification 350-401 Reliable Test Sample Questions exam. Goldmile-Infobiz's after-sales service is not only to provide the latest exam practice questions and answers and dynamic news about Cisco 350-401 Reliable Test Sample Questions certification, but also constantly updated exam practice questions and answers and binding.
All of them have passed the exam and got the certificate. They live a better life now. Our 350-401 Valid Soft Simulations study guide can release your stress of preparation for the test.
Cisco 350-401 Valid Soft Simulations - I believe that you must think so.
Our 350-401 Valid Soft Simulations exam prep is elaborately compiled and highly efficiently, it will cost you less time and energy, because we shouldn’t waste our money on some unless things. The passing rate and the hit rate are also very high, there are thousands of candidates choose to trust our 350-401 Valid Soft Simulations guide torrent and they have passed the exam. We provide with candidate so many guarantees that they can purchase our study materials no worries. So we hope you can have a good understanding of the 350-401 Valid Soft Simulations exam torrent we provide, then you can pass you exam in your first attempt.
Because this is the exam dumps that can help you pass 350-401 Valid Soft Simulations certification test at the first attempt. High passing rate of Goldmile-Infobiz questions and answers is certified by many more candidates.
350-401 PDF DEMO:
QUESTION NO: 1
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 2
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
QUESTION NO: 3
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
Our {ARDMS AE-Adult-Echocardiography exam torrent has a high quality that you can’t expect. Amazon SAP-C02-KR - Come on and visit Goldmile-Infobiz to know more information. Linux Foundation CKS - It is your right time to make your mark. The Open Group OGEA-102 - You will have thorough training and exercises from our huge question dumps, and master every question from the detailed answer analysis. But our Nursing AANP-FNP real exam is high efficient which can pass the Nursing AANP-FNP exam during a week.
Updated: May 28, 2022