Well preparation is half done, so choosing good 350-401 Valid Study Materials training materials is the key of clear exam in your first try with less time and efforts. Our website offers you the latest preparation materials for the 350-401 Valid Study Materials real exam and the study guide for your review. There are three versions according to your study habit and you can practice our 350-401 Valid Study Materials dumps pdf with our test engine that help you get used to the atmosphere of the formal test. To obtain the certificate will help you to find a better job. What? Do you have no confidence to take the exam? It doesn't matter that you can use our Goldmile-Infobiz dumps. Accordingly there are huge changes on the study models of our 350-401 Valid Study Materials exam dumps as well.
CCNP Enterprise 350-401 It costs both time and money.
When you complete your payment, you will receive an email attached with 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Valid Study Materials practice pdf, then you can instantly download it and install on your phone or computer for study. You can totally rely on us! We never concoct any praise but show our capacity by the efficiency and profession of our 350-401 Detail Explanation practice materials.
The 350-401 Valid Study Materials practice exam we offered is designed with the real questions that will help you in enhancing your knowledge about the 350-401 Valid Study Materials certification exam. Our online test engine will improve your ability to solve the difficulty of 350-401 Valid Study Materials real questions and get used to the atmosphere of the formal test. Our experts created the valid 350-401 Valid Study Materials study guide for most of candidates to help them get good result with less time and money.
There are many advantages of our Cisco 350-401 Valid Study Materials study tool.
A minor mistake may result you to lose chance even losing out on your 350-401 Valid Study Materials exam. So we hold responsible tents when compiling the 350-401 Valid Study Materials learning guide. The principles of our 350-401 Valid Study Materialspractice materials can be expressed in words like clarity, correction and completeness. Experts expressed their meaning with clarity by knowledgeable and understandable words which cannot be misunderstood.
Because the exam may put a heavy burden on your shoulder while our 350-401 Valid Study Materials practice materials can relieve you of those troubles with time passing by. Just spent some time regularly on our 350-401 Valid Study Materials exam simulation, your possibility of getting it will be improved greatly.
350-401 PDF DEMO:
QUESTION NO: 1
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 2
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 3
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 4
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
Fortinet NSE8_812 - So you can choose them according to your personal preference. We are pleased to inform you that we have engaged in this business for over ten years with our Oracle N16291GC10 exam questions. Therefore, with our Amazon SCS-C02 study materials, you can easily find the key content of the exam and review it in a targeted manner so that you can successfully pass the Amazon SCS-C02 exam. SAP C-S4PM2-2507 exam practice is also equipped with a simulated examination system that simulates the real exam environment so that you can check your progress at any time. Our service staff will help you solve the problem about the ECCouncil 312-85 training materials with the most professional knowledge and enthusiasm.
Updated: May 28, 2022