You can get a complete new and pleasant study experience with our 350-401 Valid Test Pass4Sure exam preparation for the efforts that our experts devote themselves to make. They have compiled three versions of our 350-401 Valid Test Pass4Surestudy materials: the PDF, the Software and the APP online. So you are able to study the online test engine by your cellphone or computer, and you can even study 350-401 Valid Test Pass4Sure exam preparation at your home, company or on the subway, you can make full use of your fragmentation time in a highly-efficient way. And we will give you 100% success guaranteed on the 350-401 Valid Test Pass4Sure training guide. Our 350-401 Valid Test Pass4Sure exam quiz is unlike other exam materials that are available on the market, our 350-401 Valid Test Pass4Sure study dumps specially proposed different versions to allow you to learn not only on paper, but also to use mobile phones to learn. At the same time, 350-401 Valid Test Pass4Sure test guide will provide you with very flexible learning time in order to help you pass the exam.
Our 350-401 Valid Test Pass4Sure exam questions are your best choice.
In cyber age, it’s essential to pass the 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Valid Test Pass4Sure exam to prove ability especially for lots of office workers. And our professional Exam 350-401 Tutorial study materials determine the high pass rate. According to the research statistics, we can confidently tell that 99% candidates after using our products have passed the Exam 350-401 Tutorial exam.
The online test engine is a kind of online learning, you can enjoy the advantages of APP version of our 350-401 Valid Test Pass4Sure exam guide freely. Moreover, you actually only need to download the APP online for the first time and then you can have free access to our 350-401 Valid Test Pass4Sure exam questions in the offline condition if you don’t clear cache. With the popularization of wireless network, those who are about to take part in the 350-401 Valid Test Pass4Sure exam guide to use APP on the mobile devices as their learning tool, because as long as entering into an online environment, they can instantly open the learning material from their appliances.
But our Cisco 350-401 Valid Test Pass4Sure exam questions have made it.
Our 350-401 Valid Test Pass4Sure practice dumps are so popular that all our customers are giving high praise on its high-quality to help them pass the exams. Numerous of warming feedbacks from our worthy customers give us data and confidence. We have clear data collected from customers who chose our 350-401 Valid Test Pass4Sure training engine, the passing rate is 98-100 percent. So your chance of getting success will be increased greatly by our 350-401 Valid Test Pass4Sure exam questions!
Every page is carefully arranged by our experts with clear layout and helpful knowledge to remember. Our 350-401 Valid Test Pass4Sure exam questions just focus on what is important and help you achieve your goal.
350-401 PDF DEMO:
QUESTION NO: 1
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 2
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 3
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 4
Which statement about a fabric access point is true?
A. It is in local mode an must connected directly to the fabric edge switch.
B. It is in FlexConnect mode and must be connected directly to the fabric edge switch.
C. It is in FlexConnect mode and must be connected directly to the fabric border node.
D. It is in local mode an must be connected directly to the fabric border node.
Answer: A
Explanation:
Fabric mode APs continue to support the same wireless media services that traditional APs support; apply AVC, quality of service (QoS), and other wireless policies; and establish the CAPWAP control plane to the fabric WLC. Fabric APs join as local-mode APs and must be directly connected to the fabric edge node switch to enable fabric registration events, including RLOC assignment via the fabric
WLC. The fabric edge nodes use CDP to recognize APs as special wired hosts, applying special port configurations and assigning the APs to a unique overlay network within a common EID space across a fabric. The assignment allows management simplification by using a single subnet to cover the AP infrastructure at a fabric site.
Reference: https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Campus/sda-sdg-2019oct.html
QUESTION NO: 5
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
HP HPE0-J68-KR - Therefore, this indeed helps us establish a long-term cooperation relationship on our exam braindumps. So our Databricks Associate-Developer-Apache-Spark-3.5practice materials have great brand awareness in the market. Our company attaches great importance to overall services on our Microsoft PL-200 study guide, if there is any problem about the delivery of Microsoft PL-200 exam materials, please let us know, a message or an email will be available. Our HP HPE3-CL01 study questions have simplified the complicated notions and add the instances, the stimulation and the diagrams to explain any hard-to-explain contents. As the authoritative provider of HP HPE7-A01 actual exam, we always pursue high pass rate compared with our peers to gain more attention from those potential customers.
Updated: May 28, 2022