According to different kinds of questionnaires based on study condition among different age groups, we have drawn a conclusion that the majority learners have the same problems to a large extend, that is low-efficiency, low-productivity, and lack of plan and periodicity. As a consequence of these problem, our 200-301 Latest Test Dumps Demo test prep is totally designed for these study groups to improve their capability and efficiency when preparing for Cisco exams, thus inspiring them obtain the targeted 200-301 Latest Test Dumps Demo certificate successfully. There are many advantages of our 200-301 Latest Test Dumps Demo question torrent that we are happy to introduce you and you can pass the exam for sure. Time and tide wait for no man, if you want to save time, please try to use our 200-301 Latest Test Dumps Demo preparation exam, it will cherish every minute of you and it will help you to create your life value. With the high pass rate of our 200-301 Latest Test Dumps Demo exam questions as 98% to 100% which is unbeatable in the market, we are proud to say that we have helped tens of thousands of our customers achieve their dreams and got their 200-301 Latest Test Dumps Demo certifications. Carefully testing and producing to match the certified quality standards of 200-301 Latest Test Dumps Demo exam materials, we have made specific statistic researches on the 200-301 Latest Test Dumps Demo practice materials.
200-301 Latest Test Dumps Demo study materials are here waiting for you!
CCNA 200-301 Latest Test Dumps Demo - Cisco Certified Network Associate Exam In addition, there are three different versions for all people to choose. Every day they are on duty to check for updates of 200-301 New Exam Cram Materials study materials for providing timely application. We also welcome the suggestions from our customers, as long as our clients propose rationally.
Currently, my company has introduced a variety of learning materials, covering almost all the official certification of qualification exams, and each 200-301 Latest Test Dumps Demo practice dump in our online store before the listing, are subject to stringent quality checks within the company. Thus, users do not have to worry about such trivial issues as typesetting and proofreading, just focus on spending the most practice to use our {CertName} test materials. After careful preparation, I believe you will be able to pass the exam.
Cisco 200-301 Latest Test Dumps Demo - No one will laugh at a hardworking person.
It is of no exaggeration to say that sometimes a certification is exactly a stepping-stone to success, especially when you are hunting for a job. The 200-301 Latest Test Dumps Demo study materials are of great help in this sense. People with initiative and drive all want to get a good job, and if someone already gets one, he or she will push for better position and higher salaries. With the 200-301 Latest Test Dumps Demo test training, you can both have the confidence and gumption to ask for better treatment. To earn such a material, you can spend some time to study our 200-301 Latest Test Dumps Demo study torrent. No study can be done successfully without a specific goal and a powerful drive, and here to earn a better living by getting promotion is a good one.
Once you have used our 200-301 Latest Test Dumps Demo exam training in a network environment, you no longer need an internet connection the next time you use it, and you can choose to use 200-301 Latest Test Dumps Demo exam training at your own right. Our 200-301 Latest Test Dumps Demo exam training do not limit the equipment, do not worry about the network, this will reduce you many learning obstacles, as long as you want to use 200-301 Latest Test Dumps Demo test guide, you can enter the learning state.
200-301 PDF DEMO:
QUESTION NO: 1
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 2
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 3
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 4
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 5
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
You can see our Microsoft AZ-204-KR exam materials have three version, including PDf version, APP version and soft version, the PDf version support printing. Then our PC version of our HP HPE3-CL07 exam questions can fully meet their needs only if their computers are equipped with windows system. Our Microsoft MB-280 materials provide you with the best learning prospects and give you more than you expect by adopting minimal effort. Microsoft PL-900-KR - We can send you a link within 5 to 10 minutes after your payment. CIPS L5M5 - If you want you spend least time getting the best result, our exam materials must be your best choice.
Updated: May 28, 2022