You should make progress to get what you want and move fast if you are a man with ambition. At the same time you will find that a wonderful aid will shorten your time greatly. To get the 200-301 New Study Guide Sheet certification is considered as the most direct-viewing way to make big change in your professional profile, and we are the exact 200-301 New Study Guide Sheet exam braindumps vendor. The rest of the time you can do anything you want to do to, which can fully reduce your review pressure. Saving time and improving efficiency is the consistent purpose of our 200-301 New Study Guide Sheet learning materials. You can claim for the refund of money if you do not succeed and achieve your target.
You will our 200-301 New Study Guide Sheet exam dumps are the best!
If you are still study hard to prepare the Cisco 200-301 - Cisco Certified Network Associate Exam New Study Guide Sheet exam, you're wrong. You can also know how to contact us and what other client’s evaluations about our Study 200-301 Tool test braindumps. The pages of our product also provide other information about our product and the exam.
If you are concerned about the test, however, you can choose Goldmile-Infobiz's Cisco 200-301 New Study Guide Sheet exam training materials. No matter how low your qualifications, you can easily understand the content of the training materials. And you can pass the exam successfully.
Cisco 200-301 New Study Guide Sheet - The procedure of refund is very simple.
Are you satisfied with your present job? Are you satisfied with what you are doing? Do you want to improve yourself? To master some useful skills is helpful to you. Now that you choose to work in the IT industry, you must register IT certification test and get the IT certificate which will help you to upgrade yourself. What's more important, you can prove that you have mastered greater skills. And then, to take Cisco 200-301 New Study Guide Sheet exam can help you to express your desire. Don't worry. Goldmile-Infobiz will help you to find what you need in the exam and our dumps must help you to obtain 200-301 New Study Guide Sheet certificate.
If you pay attention to using our 200-301 New Study Guide Sheet practice engine, thing will be solved easily. No one lose interest during using our 200-301 New Study Guide Sheet actual exam and become regular customers eventually.
200-301 PDF DEMO:
QUESTION NO: 1
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 2
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 3
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 4
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 5
Refer to the exhibit. After you apply the given configuration to arouter, the DHCP clients behind the device connot communicate with hosts outside of their subnet.
Which action is most likely to correct the problem?
A. configure the default gateway
B. Configure the dns server on the same subnet as the clients
C. Activate the dhcp pool
D. Correct the subnet mask
Answer: A
If you successfully get Cisco ServiceNow CIS-HAM certificate, you can finish your work better. Our SAP C_THR70_2505 exam prep is of reasonably great position from highly proficient helpers who have been devoted to their quality over ten years to figure your problems out. Goldmile-Infobiz Cisco Palo Alto Networks NetSec-Analyst questions and answers are a rare material which can help you pass you exam first time. We believe that you will never regret to buy and practice our CompTIA XK0-006 latest question. Microsoft DP-300 - Revealing whether or not a man succeeded often reflect in the certificate he obtains, so it is in IT industry.
Updated: May 28, 2022