350-401 New Exam Camp Materials & Cisco Implementing Cisco Enterprise Network Core Technologies 350-401 Encor Latest Test Experience - Goldmile-Infobiz

Our 350-401 New Exam Camp Materials exam questions can assure you that you will pass the 350-401 New Exam Camp Materials exam as well as getting the related certification under the guidance of our 350-401 New Exam Camp Materials study materials as easy as pie. Firstly, the pass rate among our customers has reached as high as 98% to 100%, which marks the highest pass rate in the field. Secondly, you can get our 350-401 New Exam Camp Materials practice test only in 5 to 10 minutes after payment, which enables you to devote yourself to study as soon as possible. For the convenience of the users, the 350-401 New Exam Camp Materials test materials will be updated on the homepage and timely update the information related to the qualification examination. Annual qualification examination, although content broadly may be the same, but as the policy of each year, the corresponding examination pattern grading standards and hot spots will be changed, as a result, the 350-401 New Exam Camp Materials test prep can help users to spend the least time, you can know the test information directly what you care about on the learning platform that provided by us, let users save time and used their time in learning the new hot spot concerning about the knowledge content. And you will certainly be satisfied with our online version of our 350-401 New Exam Camp Materials training quiz.

CCNP Enterprise 350-401 Need any help, please contact with us again!

CCNP Enterprise 350-401 New Exam Camp Materials - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Our products’ test bank covers the entire syllabus of the test and all the possible questions which may appear in the test. Our questions and answers are based on the real exam and conform to the popular trend in the industry. You only need 20-30 hours to learn Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) exam torrent and prepare the exam.

The study system of our company will provide all customers with the best study materials. If you buy the 350-401 New Exam Camp Materials latest questions of our company, you will have the right to enjoy all the 350-401 New Exam Camp Materials certification training dumps from our company. More importantly, there are a lot of experts in our company; the first duty of these experts is to update the study system of our company day and night for all customers.

Cisco 350-401 New Exam Camp Materials - But it doesn't matter.

With the increasing marketization, the product experience marketing has been praised by the consumer market and the industry. Attract users interested in product marketing to know just the first step, the most important is to be designed to allow the user to try before buying the Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) study training dumps, so we provide free pre-sale experience to help users to better understand our products. The user only needs to submit his E-mail address and apply for free trial online, and our system will soon send free demonstration research materials of 350-401 New Exam Camp Materials latest questions to download. If the user is still unsure which is best for him, consider applying for a free trial of several different types of test materials. It is believed that through comparative analysis, users will be able to choose the most satisfactory 350-401 New Exam Camp Materials test guide.

And this version also helps establish the confidence of the candidates when they attend the 350-401 New Exam Camp Materials exam after practicing. Because of the different habits and personal devices, requirements for the version of our 350-401 New Exam Camp Materials exam questions vary from person to person.

350-401 PDF DEMO:

QUESTION NO: 1
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.

QUESTION NO: 2
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html

QUESTION NO: 3
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.

QUESTION NO: 4
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").

QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.

CompTIA 220-1102 - Our Cisco training materials are famous at home and abroad, the main reason is because we have other companies that do not have core competitiveness, there are many complicated similar products on the market, if you want to stand out is the selling point of needs its own. Our Cisco 300-815 exam guide question is recognized as the standard and authorized study materials and is widely commended at home and abroad. Microsoft AZ-305 - Our after-sales service staff will be on-line service 24 hours a day, 7 days a week. No matter in the day or on the night, you can consult us the relevant information about our Microsoft PL-600 preparation exam through the way of chatting online or sending emails. During the learning process on our BCI CBCI study materials, you can contact us anytime if you encounter any problems.

Updated: May 28, 2022