350-401 New Exam Guide Files & Cisco Implementing Cisco Enterprise Network Core Technologies 350-401 Encor Latest Test Dumps - Goldmile-Infobiz

Different person has different goals, but our Goldmile-Infobiz aims to help you successfully pass 350-401 New Exam Guide Files exam. Maybe to pass 350-401 New Exam Guide Files exam is the first step for you to have a better career in IT industry, but for our Goldmile-Infobiz, it is the entire meaning for us to develop 350-401 New Exam Guide Files exam software. So we try our best to extend our dumps, and our Goldmile-Infobiz elite comprehensively analyze the dumps so that you are easy to use it. If a person is strong-willed, it is close at hand. I think you should be such a person. We can be along with you in the development of IT industry.

CCNP Enterprise 350-401 Good choice may do more with less.

CCNP Enterprise 350-401 New Exam Guide Files - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) In addition, if you first take the exam, you can use software version dumps. The contents of 350-401 Top Dumps free download pdf will cover the 99% important points in your actual test. In case you fail on the first try of your exam with our 350-401 Top Dumps free practice torrent, we will give you a full refund on your purchase.

Like the real exam, Goldmile-Infobiz Cisco 350-401 New Exam Guide Files exam dumps not only contain all questions that may appear in the actual exam, also the SOFT version of the dumps comprehensively simulates the real exam. With Goldmile-Infobiz real questions and answers, when you take the exam, you can handle it with ease and get high marks.

Cisco 350-401 New Exam Guide Files - We provide one-year customer service; 4.

We have a lasting and sustainable cooperation with customers who are willing to purchase our 350-401 New Exam Guide Files actual exam. We try our best to renovate and update our 350-401 New Exam Guide Files study materials in order to help you fill the knowledge gap during your learning process, thus increasing your confidence and success rate. At the same time, 350-401 New Exam Guide Files preparation baindumps can keep pace with the digitized world by providing timely application. You will never fell disappointed with our 350-401 New Exam Guide Files exam quiz.

If you are urgent to pass exam our exam materials will be suitable for you. Mostly you just need to remember the questions and answers of our Cisco 350-401 New Exam Guide Files exam review questions and you will clear exams.

350-401 PDF DEMO:

QUESTION NO: 1
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.

QUESTION NO: 2
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.

QUESTION NO: 3
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.

QUESTION NO: 4
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D

QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html

With the high pass rate as 98% to 100%, we can proudly claim that we are unmatched in the market for our accurate and latest Microsoft AZ-400 exam dumps. We offer you the most accurate ASQ CSSBB exam answers that will be your key to pass the certification exam in your first try. By selecting our Amazon AWS-Certified-Developer-Associate-KR training material, you will be able to pass the Amazon AWS-Certified-Developer-Associate-KR exam in the first attempt. The Amazon SOA-C02 test answers are tested and approved by our certified experts and you can check the accuracy of our questions from our free demo. Now you can pass Cisco Cisco 300-425 exam without going through any hassle.

Updated: May 28, 2022