All customers have the right to choose the most suitable version according to their need after buying our study materials. The PDF version of the 350-401 Reliable Exam Simulator Free exam prep has many special functions, including download the demo for free, support the printable format and so on. We can make sure that the PDF version of the 350-401 Reliable Exam Simulator Free test questions will be very convenient for all people. If you haven't found the right materials yet, please don't worry. Maybe our 350-401 Reliable Exam Simulator Free practice engine can give you a leg up which is our company's flagship product designed for the 350-401 Reliable Exam Simulator Free exam. Every worker in our company sticks to their jobs all the time.
CCNP Enterprise 350-401 So our customers can pass the exam with ease.
You have Goldmile-Infobiz Cisco 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Reliable Exam Simulator Free certification exam training materials, the same as having a bright future. Therefore, we have provided three versions of Best Quality 350-401 practice guide: the PDF, the Software and the APP online. You can choose according to your actual situation.
Because Goldmile-Infobiz's Cisco 350-401 Reliable Exam Simulator Free exam training materials will help us to pass the exam successfully. With it, we would not be afraid, and will not be confused. Goldmile-Infobiz's Cisco 350-401 Reliable Exam Simulator Free exam training materials is the best medicine for candidates.
Cisco 350-401 Reliable Exam Simulator Free - In order to success, don't miss Goldmile-Infobiz.
Thanks to modern technology, learning online gives people access to a wider range of knowledge, and people have got used to convenience of electronic equipment. As you can see, we are selling our 350-401 Reliable Exam Simulator Free learning guide in the international market, thus there are three different versions of our 350-401 Reliable Exam Simulator Free exam materials which are prepared to cater the different demands of various people. It is worth mentioning that, the simulation test is available in our software version. With the simulation test, all of our customers will get accustomed to the 350-401 Reliable Exam Simulator Free exam easily, and get rid of bad habits, which may influence your performance in the real 350-401 Reliable Exam Simulator Free exam. In addition, the mode of 350-401 Reliable Exam Simulator Free learning guide questions and answers is the most effective for you to remember the key points. During your practice process, the 350-401 Reliable Exam Simulator Free test questions would be absorbed, which is time-saving and high-efficient.
This is because it can really help students to save a lot of time, and ensure that everyone pass the exam successfully. Certainly you have heard of Goldmile-Infobiz Cisco 350-401 Reliable Exam Simulator Free dumps.
350-401 PDF DEMO:
QUESTION NO: 1
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 2
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 3
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 4
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
High efficiency service has won reputation for us among multitude of customers, so choosing our Pegasystems PEGACPDS25V1 real study dumps we guarantee that you won’t be regret of your decision. Microsoft PL-600 - Selecting the right method will save your time and money. Though at first a lot of our new customers didn't believe our CheckPoint 156-315.82 exam questions, but they have became the supporters now. If you want to own a better and bright development in the IT your IT career, it is the only way for you to pass Scrum SSM exam. As a result, many customers get manifest improvement and lighten their load by using our Fortinet NSE5_FSW_AD-7.6 actual exam.
Updated: May 28, 2022