Do you often envy the colleagues around you can successfully move to a larger company to achieve the value of life? Are you often wondering why your classmate, who has scores similar to yours, can receive a large company offer after graduation and you are rejected? In fact, what you lack is not hard work nor luck, but 350-401 Study Guide Free Pdf guide question. If you do not have extraordinary wisdom, do not want to spend too much time on learning, but want to reach the pinnacle of life through 350-401 Study Guide Free Pdf exam, then you must have 350-401 Study Guide Free Pdf question torrent. Sometimes, their useful suggestions will also be adopted. That is the important reason why our 350-401 Study Guide Free Pdf exam materials are always popular in the market. Our 350-401 Study Guide Free Pdf study materials are easy to be mastered and boost varied functions.
CCNP Enterprise 350-401 You need to have a brave attempt.
As we know, the 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Study Guide Free Pdf certification is the main reflection of your ability. They provide a very effective training tools and online services for your. If you want to buy Goldmile-Infobiz products, Goldmile-Infobiz will provide you with the latest, the best quality and very detailed training materials as well as a very accurate exam practice questions and answers to be fully prepared for you to participate in the Cisco certification Frequent 350-401 Updates exam.
On the one hand, by the free trial services you can get close contact with our products, learn about the detailed information of our 350-401 Study Guide Free Pdf study materials, and know how to choose the different versions before you buy our products. On the other hand, using free trial downloading before purchasing, I can promise that you will have a good command of the function of our 350-401 Study Guide Free Pdf exam prepare. According to free trial downloading, you will know which version is more suitable for you in advance and have a better user experience.
Cisco 350-401 Study Guide Free Pdf - You must work hard to upgrade your IT skills.
Our 350-401 Study Guide Free Pdf exam questions can meet your needs to the maximum extent, and our 350-401 Study Guide Free Pdf learning materials are designed to the greatest extent from the customer's point of view. So you don't have to worry about the operational complexity. As soon as you enter the learning interface of our system and start practicing our 350-401 Study Guide Free Pdf learning materials on our Windows software, you will find small buttons on the interface. It is very easy and convenient to use and find.
So you can quickly know your weaknesses and shortcomings, which is helpful to your further study. For easy use, Goldmile-Infobiz provides you with different version exam dumps.
350-401 PDF DEMO:
QUESTION NO: 1
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 2
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 3
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 4
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 5
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
HITRUST CCSFP - Their masterpieces are instrumental to offer help and improve your performance in the real exam. Our professional IT team of Goldmile-Infobiz continues updating and improving Microsoft GH-300 exam dumps in order to guarantee you win the exam while you are preparing for the exam. IASP SPP exam questions can fuel your speed and help you achieve your dream. The aim that we try our best to develop the Salesforce Analytics-Arch-201 exam software is to save you money and time, and offer the effective help for you to pass the exam during your preparation for Salesforce Analytics-Arch-201 exam. Cisco 300-415 - But if you buy our Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) test torrent you only need 1-2 hours to learn and prepare the exam and focus your main attention on your most important thing.
Updated: May 28, 2022