Obviously such positive pass rate will establish you confidence as well as strengthen your will to pass your 350-401 Valid Study Guide Sheet exam. No other vendors can challenge our data in this market. At the same time, by studying with our 350-401 Valid Study Guide Sheet practice materials, you avoid wasting your precious time on randomly looking for the key point information. You will feel grateful to choose our 350-401 Valid Study Guide Sheet learning quiz! The data for our 350-401 Valid Study Guide Sheet practice materials that come up with our customers who have bought our 350-401 Valid Study Guide Sheet actual exam and provided their scores show that our high pass rate is 98% to 100%. Usually you may take months to review a professional exam, but with 350-401 Valid Study Guide Sheet exam guide, you only need to spend 20-30 hours to review before the exam, and with our 350-401 Valid Study Guide Sheet study materials, you will no longer need any other review materials, because our learning dumps have already included all the important test points.
But our 350-401 Valid Study Guide Sheet exam questions have made it.
We have clear data collected from customers who chose our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Valid Study Guide Sheet training engine, the passing rate is 98-100 percent. Every page is carefully arranged by our experts with clear layout and helpful knowledge to remember. Our New 350-401 Exam Cram exam questions just focus on what is important and help you achieve your goal.
with our 350-401 Valid Study Guide Sheet exam dumps for 20 to 30 hours, we can claim that our customers are confident to take part in your 350-401 Valid Study Guide Sheet exam and pass it for sure. In the progress of practicing our 350-401 Valid Study Guide Sheet study materials, our customers improve their abilities in passing the 350-401 Valid Study Guide Sheet exam, we also upgrade the standard of the exam knowledge. Therefore, this indeed helps us establish a long-term cooperation relationship on our exam braindumps.
Cisco 350-401 Valid Study Guide Sheet - These services assure your avoid any loss.
Our 350-401 Valid Study Guide Sheet exam braindumps have become a brand that is good enough to stand out in the market. The high quality product like our 350-401 Valid Study Guide Sheet study quiz has no need to advertise everywhere, and exerts influential effects which are obvious and everlasting during your preparation. The exam candidates of our 350-401 Valid Study Guide Sheet study materials are the best living and breathing ads. Just look at the comments on the 350-401 Valid Study Guide Sheet training guide, you will know that how popular they are among the candidates.
We have free demos of our 350-401 Valid Study Guide Sheet exam questions for your information and the demos offer details of real exam contents. All contents of 350-401 Valid Study Guide Sheet practice quiz contain what need to be mastered.
350-401 PDF DEMO:
QUESTION NO: 1
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
QUESTION NO: 2
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 3
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
You will find the exam is a piece of cake with the help of our Juniper JN0-232 study materials. And our UiPath UiPath-ABAAv1 training braindumps have became their best assistant on the way to pass the exam. And if you want to get all benefits like that, our CompTIA SY0-701 training quiz is your rudimentary steps to begin. All contents of Microsoft DP-900 training guide are being explicit to make you have explicit understanding of this exam. Under coordinated synergy of all staff, our Huawei H35-211_V2.5 practice braindumps achieved a higher level of perfection by keeping close attention with the trend of dynamic market.
Updated: May 28, 2022