But they have to do it. So they have restless state of mind. However, With Goldmile-Infobiz Cisco 350-401 Valid Test Camp File exam training materials, the kind of mentality will disappear. In this era of rapid development of information technology, Goldmile-Infobiz just questions provided by one of them. Why do most people choose Goldmile-Infobiz? This is because the exam information provided by Goldmile-Infobiz will certainly be able to help you pass the exam. You can use Goldmile-Infobiz's Cisco 350-401 Valid Test Camp File exam training materials.
CCNP Enterprise 350-401 How to get to heaven? Shortcart is only one.
CCNP Enterprise 350-401 Valid Test Camp File - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) This is unprecedented true and accurate test materials. Have you thought of how to easily pass Cisco 350-401 Pass4Sure Exam Prep test? Have you found the trick? If you don't know what to do, I'll help you. In actual, there are many methods to sail through 350-401 Pass4Sure Exam Prep exam.
Select Goldmile-Infobiz is to choose success. Goldmile-Infobiz's Cisco 350-401 Valid Test Camp File exam training materials can help all candidates to pass the IT certification exam. Through the use of a lot of candidates, Goldmile-Infobiz's Cisco 350-401 Valid Test Camp File exam training materials is get a great response aroud candidates, and to establish a good reputation.
Cisco 350-401 Valid Test Camp File - Good choice may do more with less.
Goldmile-Infobiz Cisco 350-401 Valid Test Camp File practice test dumps can help you pass IT certification exam in a relaxed manner. In addition, if you first take the exam, you can use software version dumps. Because the SOFT version questions and answers completely simulate the actual exam. You can experience the feeling in the actual test in advance so that you will not feel anxious in the real exam. After you use the SOFT version, you can take your exam in a relaxed attitude which is beneficial to play your normal level.
The 350-401 Valid Test Camp File study guide provided by the Goldmile-Infobiz is available, affordable, updated and of best quality to help you overcome difficulties in the actual test. We continue to update our dumps in accord with 350-401 Valid Test Camp File real exam by checking the updated information every day.
350-401 PDF DEMO:
QUESTION NO: 1
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 2
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 3
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 4
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
Workday Workday-Pro-Integrations - With Goldmile-Infobiz real questions and answers, when you take the exam, you can handle it with ease and get high marks. The content of our CrowdStrike CCFA-200b dumps torrent covers the key points of exam, which will improve your ability to solve the difficulties of CrowdStrike CCFA-200b real questions. Our Microsoft AZ-204-KR exam software offers comprehensive and diverse questions, professional answer analysis and one-year free update service after successful payment; with the help of our Microsoft AZ-204-KR exam software, you can improve your study ability to obtain Microsoft AZ-204-KR exam certification. There are Fortinet NSE7_SOC_AR-7.6 free demo in our exam page for your reference and one-year free update are waiting for you. It is impossible to pass EMC D-PWF-DS-01 exam without efforts and time, but our Goldmile-Infobiz team will try our best to reduce your burden when you are preparing for EMC D-PWF-DS-01 exam.
Updated: May 28, 2022