We believe that you must have paid more attention to the pass rate of the Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) exam questions. If you focus on the study materials from our company, you will find that the pass rate of our products is higher than other study materials in the market, yes, we have a 99% pass rate, which means if you take our the 350-401 Valid Test Cram Sheet study dump into consideration, it is very possible for you to pass your exam and get the related certification. As the old saying goes, practice is the only standard to testify truth. Because our study material is prepared strictly according to the exam outline by industry experts, whose purpose is to help students pass the exam smoothly. As the authoritative provider of 350-401 Valid Test Cram Sheet test guide, we always pursue high passing rates compared with our peers to gain more attention from potential customers. Respect the user's choice, will not impose the user must purchase the 350-401 Valid Test Cram Sheet practice materials.
CCNP Enterprise 350-401 But they stick to work hard and never abandon.
And our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Valid Test Cram Sheet study braindumps contain three different versions: the PDF, Software and APP online. All consumers who are interested in Valid 350-401 Vce guide materials can download our free trial database at any time by visiting our platform. During the trial process, you can learn about the three modes of Valid 350-401 Vce study quiz and whether the presentation and explanation of the topic in Valid 350-401 Vce preparation questions is consistent with what you want.
We firmly believe that you cannot be an exception. Choosing our 350-401 Valid Test Cram Sheet exam questions actually means that you will have more opportunities to be promoted in the near future. If you eventually fail the exam, we will refund the fee by the contract.
Cisco 350-401 Valid Test Cram Sheet - Sharp tools make good work.
Add Goldmile-Infobiz's products to cart now! You will have 100% confidence to participate in the exam and disposably pass Cisco certification 350-401 Valid Test Cram Sheet exam. At last, you will not regret your choice.
Hope you can give our 350-401 Valid Test Cram Sheet exam questions full trust, we will not disappoint you. And with our 350-401 Valid Test Cram Sheet study materials, you are bound to pass the exam.
350-401 PDF DEMO:
QUESTION NO: 1
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 2
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
QUESTION NO: 3
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
NAHQ CPHQ - Goldmile-Infobiz's providing training material is very close to the content of the formal examination. HP HPE0-J82 - As long as you can provide us with a transcript or other proof of your failure, we can refund you the full amount immediately. MSSC CLT - We will provide one year free update service for those customers who choose Goldmile-Infobiz's products. HRPA CHRP-KE - Now it is time for you to take an exam for getting the certification. Amazon SOA-C03 - As most of our exam questions are updated monthly, you will get the best resources with market-fresh quality and reliability assurance.
Updated: May 28, 2022