Goldmile-Infobiz에 믿음을 느낄수 있도록 구매사이트마다 무료샘플 다운가능기능을 설치하였습니다.무료샘플을 체험해보시고Goldmile-Infobiz을 선택해주세요. Goldmile-Infobiz 에서 출시한Cisco인증350-401참고덤프 덤프는Cisco인증350-401참고덤프 실제시험의 출제범위와 출제유형을 대비하여 제작된 최신버전 덤프입니다. 시험문제가 바뀌면 제일 빠른 시일내에 덤프를 업데이트 하도록 최선을 다하고 있으며 1년 무료 업데이트서비스를 제공해드립니다. 고객님들의 도와 Cisco 350-401참고덤프 시험을 쉽게 패스하는게 저희의 취지이자 최선을 다해 더욱 높은 적중율을 자랑할수 있다록 노력하고 있습니다. 뿐만 아니라 Goldmile-Infobiz에서는한국어 온라인서비스상담, 구매후 일년무료업데이트서비스, 불합격받을수 환불혹은 덤프교환 등탄탄한 구매후 서비스를 제공해드립니다. Cisco인증 350-401참고덤프덤프 구매의향이 있으시면 무료샘플을 우선 체험해보세요.
Cisco인증 350-401참고덤프덤프에는 실제시험문제의 거의 모든 문제를 적중하고 습니다.
CCNP Enterprise 350-401참고덤프 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) 그리고 우리는 일년무료 업데이트를 제공합니다. IT인증시험은 국제적으로 인정받는 자격증을 취득하는 과정이라 난이도가 아주 높습니다. Cisco인증 350-401 최신시험후기시험은 IT인증자격증을 취득하는 시험과목입니다.어떻게 하면 난이도가 높아 도전할 자신이 없는 자격증을 한방에 취득할수 있을가요? 그 답은Goldmile-Infobiz에서 찾을볼수 있습니다.
우리덤프로Cisco인증350-401참고덤프시험준비를 잘하시면 100%Cisco인증350-401참고덤프시험을 패스할 수 있습니다. Goldmile-Infobiz덤프로 여러분은Cisco인증350-401참고덤프시험을 패스는 물론 여러분의 귀증한 간도 절약하실 수 있습니다. Cisco인증350-401참고덤프시험을 패스하기가 어렵다고 하면 합습가이드를 선택하여 간단히 통과하실 수 잇습니다.
Cisco 350-401참고덤프 - 단기간에 시험패스의 기적을 가져다드리는것을 약속합니다.
Cisco 350-401참고덤프인증시험패스에는 많은 방법이 있습니다. 먼저 많은 시간을 투자하고 신경을 써서 전문적으로 과련 지식을 터득한다거나; 아니면 적은 시간투자와 적은 돈을 들여 Goldmile-Infobiz의 인증시험덤프를 구매하는 방법 등이 있습니다.
Goldmile-Infobiz는 여러분이 우리 자료로 관심 가는 인중시험에 응시하여 안전하게 자격증을 취득할 수 있도록 도와드립니다. 아직도Cisco 인증350-401참고덤프 인증시험으로 고민하시고 계십니까? Cisco 인증350-401참고덤프인증시험 가이드를 사용하실 생각은 없나요? Goldmile-Infobiz는 여러분께 시험패스의 편리를 드릴 수 있습니다.
350-401 PDF DEMO:
QUESTION NO: 1
Which statement about a fabric access point is true?
A. It is in local mode an must connected directly to the fabric edge switch.
B. It is in FlexConnect mode and must be connected directly to the fabric edge switch.
C. It is in FlexConnect mode and must be connected directly to the fabric border node.
D. It is in local mode an must be connected directly to the fabric border node.
Answer: A
Explanation:
Fabric mode APs continue to support the same wireless media services that traditional APs support; apply AVC, quality of service (QoS), and other wireless policies; and establish the CAPWAP control plane to the fabric WLC. Fabric APs join as local-mode APs and must be directly connected to the fabric edge node switch to enable fabric registration events, including RLOC assignment via the fabric
WLC. The fabric edge nodes use CDP to recognize APs as special wired hosts, applying special port configurations and assigning the APs to a unique overlay network within a common EID space across a fabric. The assignment allows management simplification by using a single subnet to cover the AP infrastructure at a fabric site.
Reference: https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Campus/sda-sdg-2019oct.html
QUESTION NO: 2
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 3
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 4
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 5
Which description of an SD-Access wireless network infrastructure deployment is true?
A. The wireless client is part of the fabric overlay.
B. The access point is part of the fabric underlay.
C. The WLC is part of the fabric underlay.
D. The access point is part the fabric overlay.
Answer: B
Cisco인증Amazon SAA-C03시험덤프는Goldmile-Infobiz가 최고의 선택입니다. Cisco CWNP CWAP-405인증시험덤프는 적중율이 높아 100% Cisco CWNP CWAP-405Cisco CWNP CWAP-405시험에서 패스할수 있게 만들어져 있습니다. HashiCorp Terraform-Associate-003 - 시간과 돈을 적게 들이는 반면 효과는 십점만점에 십점입니다. 가장 적은 시간은 투자하여 어려운Cisco Microsoft PL-600시험을 통과하여 자격증을 많이 취득하셔서 IT업계에서 자신만의 가치를 찾으세요. Cisco인증 Palo Alto Networks PSE-Cortex-Pro-24시험을 한방에 편하게 통과하여 자격증을 취득하려면 시험전 공부가이드가 필수입니다.
Updated: May 28, 2022