Goldmile-Infobiz의 덤프를 장바구니에 넣으세요. 그리고 Goldmile-Infobiz에서는 무료로 24시간 온라인상담이 있습니다. 여러분은 우리. 패스할 확율은 아주 낮습니다. 노력하지 않고야 당연히 불가능한 일이 아니겠습니까? Cisco 인증350-401최신버전자료 시험은 기초 지식 그리고 능숙한 전업지식이 필요 합니다. 비스를 제공해드려 아무런 걱정없이 시험에 도전하도록 힘이 되어드립니다.
CCNP Enterprise 350-401 IT인증시험문제는 수시로 변경됩니다.
만일Cisco 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR)최신버전자료인증시험을 첫 번째 시도에서 실패를 한다면 Cisco 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR)최신버전자료덤프비용 전액을 환불 할 것입니다. Cisco인증 350-401 시험응시시험을 패스해서 자격증을 취득하려고 하는데 시험비며 학원비며 공부자료비며 비용이 만만치 않다구요? 제일 저렴한 가격으로 제일 효과좋은Goldmile-Infobiz 의 Cisco인증 350-401 시험응시덤프를 알고 계시는지요? Goldmile-Infobiz 의 Cisco인증 350-401 시험응시덤프는 최신 시험문제에 근거하여 만들어진 시험준비공부가이드로서 학원공부 필요없이 덤프공부만으로도 시험을 한방에 패스할수 있습니다. 덤프를 구매하신분은 철저한 구매후 서비스도 받을수 있습니다.
Goldmile-Infobiz Cisco 350-401최신버전자료덤프의 질문들과 답변들은 100%의 지식 요점과 적어도 98%의 시험 문제들을 커버하는,수년동안 가장 최근의Cisco 350-401최신버전자료시험 요점들을 컨설팅 해 온 시니어 프로 IT 전문가들의 그룹에 의해 구축 됩니다. Goldmile-Infobiz의 IT전문가들이 자신만의 경험과 끊임없는 노력으로 최고의Cisco 350-401최신버전자료학습자료를 작성해 여러분들이Cisco 350-401최신버전자료시험에서 패스하도록 도와드립니다.
Cisco 350-401최신버전자료 - 하지만 문제는 어덯게 이 시험을 패스할것이냐이죠.
Goldmile-Infobiz 의 엘리트는 다년간 IT업계에 종사한 노하우로 높은 적중율을 자랑하는 Cisco 350-401최신버전자료덤프를 연구제작하였습니다. 한국어 온라인서비스가 가능하기에 Cisco 350-401최신버전자료덤프에 관하여 궁금한 점이 있으신 분은 구매전 문의하시면 됩니다. Cisco 350-401최신버전자료덤프로 시험에서 좋은 성적 받고 자격증 취득하시길 바랍니다.
만약 아직도Cisco 350-401최신버전자료시험패스를 위하여 고군분투하고 있다면 바로 우리 Goldmile-Infobiz를 선택함으로 여러분의 고민을 날려버릴 수 잇습니다, 우리 Goldmile-Infobiz에서는 최고의 최신의 덤프자료를 제공 합으로 여러분을 도와Cisco 350-401최신버전자료인증자격증을 쉽게 취득할 수 있게 해드립니다. 만약Cisco 350-401최신버전자료인증시험으로 한층 업그레이드된 자신을 만나고 싶다면 우리Goldmile-Infobiz선택을 후회하지 않을 것입니다, 우리Goldmile-Infobiz과의 만남으로 여러분은 한번에 아주 간편하게Cisco 350-401최신버전자료시험을 패스하실 수 있으며,Cisco 350-401최신버전자료자격증으로 완벽한 스펙을 쌓으실 수 있습니다,
350-401 PDF DEMO:
QUESTION NO: 1
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 2
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 3
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 4
Which statement about a fabric access point is true?
A. It is in local mode an must connected directly to the fabric edge switch.
B. It is in FlexConnect mode and must be connected directly to the fabric edge switch.
C. It is in FlexConnect mode and must be connected directly to the fabric border node.
D. It is in local mode an must be connected directly to the fabric border node.
Answer: A
Explanation:
Fabric mode APs continue to support the same wireless media services that traditional APs support; apply AVC, quality of service (QoS), and other wireless policies; and establish the CAPWAP control plane to the fabric WLC. Fabric APs join as local-mode APs and must be directly connected to the fabric edge node switch to enable fabric registration events, including RLOC assignment via the fabric
WLC. The fabric edge nodes use CDP to recognize APs as special wired hosts, applying special port configurations and assigning the APs to a unique overlay network within a common EID space across a fabric. The assignment allows management simplification by using a single subnet to cover the AP infrastructure at a fabric site.
Reference: https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Campus/sda-sdg-2019oct.html
QUESTION NO: 5
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
SAP C-S4CS-2508 - 만일 고객이 우리 제품을 구입하고 첫 번째 시도에서 성공을 하지 못 한다면 모든 정보를 확인 한 후에 구매 금액 전체를 환불 할 것 입니다. Microsoft MB-800 - 우리Goldmile-Infobiz의 자료들은 여러분의 이런 시험준비에 많은 도움이 될 것입니다. Goldmile-Infobiz의 Cisco Amazon SCS-C02덤프를 공부하면 100% Cisco Amazon SCS-C02 시험패스를 보장해드립니다. Cisco Cisco 300-715인증시험은 현재IT업계에서 아주 인기 있는 시험입니다.많은 IT인사들이 관연 자격증을 취득하려고 노력하고 있습니다.Cisco Cisco 300-715인증시험에 대한 열기는 식지 않습니다.Cisco Cisco 300-715자격증은 여러분의 사회생활에 많은 도움이 될 것이며 연봉상승 등 생활보장에 업그레이드 될 것입니다. 이런 자료들은 여러분이Cisco인증시험중의Salesforce Platform-App-Builder시험을 안전하게 패스하도록 도와줍니다.
Updated: May 28, 2022