有很多方法，以備你的 Cisco的350-401信息資訊的考試，本站提供了可靠的培訓工具，以準備你的下一個Cisco的350-401信息資訊的考試認證，我們Goldmile-Infobiz Cisco的350-401信息資訊的考試學習資料包括測試題及答案，我們的資料是通過實踐檢驗的軟體，我們將滿足所有的有關IT認證。 在談到350-401信息資訊考試認證，很難忽視的是可靠性，Goldmile-Infobiz的350-401信息資訊考試培訓資料是特別設計，以最大限度的提高你的工作效率，本站在全球範圍內執行這項考試通過率最大化。 我們Goldmile-Infobiz培訓資料可以測試你在準備考試時的知識，也可以評估在約定的時間內你的表現。
CCNP Enterprise 350-401 因為這是一個可以保證一次通過考試的資料。
CCNP Enterprise 350-401信息資訊 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) 人之所以能，是相信能。 周圍有很多朋友都通過了Cisco的免費下載 350-401 考題認證考試嗎？他們都是怎麼做到的呢？就讓Goldmile-Infobiz的網站來告訴你吧。Goldmile-Infobiz的免費下載 350-401 考題考古題擁有最新最全的資料，為你提供優質的服務，是能讓你成功通過免費下載 350-401 考題認證考試的不二選擇，不要再猶豫了，快來Goldmile-Infobiz的網站瞭解更多的資訊，讓我們幫助你通過考試吧。
因為這個考古題的命中率非常高，只要你認真記住考古題裏面出現的問題和答案，那麼你就可以通過350-401信息資訊考試。你已經報名參加Cisco的350-401信息資訊認證考試了嗎？“馬上就要到考試的時間了，但是我還是沒有信心通過考試，應該怎麼辦呢？有捷徑可以讓我順利通過考試嗎？看參考書的時間也不夠了。”你現在有這樣的心情嗎？不用著急，即使考試時間快到了，也還是有機會可以好好準備考試的。
Cisco 350-401信息資訊 - Goldmile-Infobiz提供的考試練習題的答案是非常準確的。
你在擔心如何通過可怕的Cisco的350-401信息資訊考試嗎？不用擔心，有Goldmile-Infobiz Cisco的350-401信息資訊考試培訓資料在手，任何IT考試認證都變得很輕鬆自如。我們Goldmile-Infobiz Cisco的350-401信息資訊考試培訓資料是Cisco的350-401信息資訊考試認證準備的先鋒。
我相信不論在哪個行業工作的人都希望自己有很好的職業前景。當然在競爭激烈的IT行業裏面也不例外。
350-401 PDF DEMO:
QUESTION NO: 1
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 2
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 3
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 4
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
Oracle 1Z0-947 - Goldmile-Infobiz就是一個能成就很多IT專業人士夢想的網站。 在Goldmile-Infobiz的網站上你可以免費下載Goldmile-Infobiz為你提供的關於Cisco ISTQB ISTQB-CTFL 認證考試學習指南和部分練習題及答案作為嘗試。 你正在為了怎樣通過Cisco的PECB ISO-9001-Lead-Auditor考試絞盡腦汁嗎？Cisco的PECB ISO-9001-Lead-Auditor考試的認證資格是當代眾多IT認證考試中最有價值的資格之一。 The Open Group OGEA-101 - 如果你選擇購買Goldmile-Infobiz的產品，Goldmile-Infobiz將為你提供每天24小時的線上客戶服務和提供一年的免費更新服務，及時的通知顧客最新的考試資訊讓客戶有充分準備。 Cisco的Microsoft AI-102-KR認證考試是現在IT領域非常有人氣的考試。
Updated: May 28, 2022