在你的職業生涯中，你正面臨著挑戰嗎？你想提高自己的技能更好地向別人證明你自己嗎？你想得到更多的機會晉升嗎？那麼快報名參加IT認證考試獲得認證資格吧。Cisco的認證考試是IT領域很重要的考試之一，如果獲得Cisco的認證資格，那麼你就可以得到很大的幫助。你可以先從通過350-401在線考題認證考試開始，因為這是Cisco的一個非常重要的考試。 Goldmile-Infobiz Cisco的350-401在線考題考試培訓資料是由考生在類比的情況下學習，你可以控制題型和一些問題以及每個測試的時間，在Goldmile-Infobiz網站裏，你可以沒有壓力和焦慮來準備考試，同時也可以避免一些常見的錯誤，這樣你會獲得信心，在實際測試時能重複你的經驗，你將涵蓋各個領域和類別的微軟技術，幫助你成功的獲得認證。 如果你正在為如何通過350-401在線考題考試而煩惱，這是沒有必要，通過最新的考試要點來提供覆蓋率很廣的Cisco 350-401在線考題擬真試題，幫助考生做好充足的考前準備。
CCNP Enterprise 350-401 為了明天的成功，選擇Goldmile-Infobiz是正確的。
那麼，你已經取得了現在最受歡迎的Cisco的350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR)在線考題認定考試的資格了嗎？對於350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR)在線考題考試，你瞭解多少呢？如果你想通過這個考試但是掌握的相關知識不足，你應該怎麼辦呢？不用著急，Goldmile-Infobiz可以給你提供幫助。 在如今競爭激烈的IT行業中，通過了Cisco 350-401 考試內容 認證考試是有很多好處的。因為有了Cisco 350-401 考試內容 認證證書就可以提高收入。
Goldmile-Infobiz的350-401在線考題考古題不僅可以幫你節省時間，更重要的是，它可以保證你通過考試。再沒有比這個資料更好的工具了。與其浪費你的時間準備考試，不如用那些時間來做些更有用的事情。
Cisco 350-401在線考題 - 這是非常有價值的考試，肯定能幫助你實現你的願望。
IT測試和認證在當今這個競爭激烈的世界變得比以往任何時候都更重要，這些都意味著一個與眾不同的世界的未來，Cisco的350-401在線考題考試將是你職業生涯中的里程碑，並可能開掘到新的機遇，但你如何能通過Cisco的350-401在線考題考試？別擔心，幫助就在眼前，有了Goldmile-Infobiz就不用害怕，Goldmile-Infobiz Cisco的350-401在線考題考試的試題及答案是考試準備的先鋒。
我們保證350-401在線考題考古題的品質，百分之百通過考試，對于購買我們網站350-401在線考題題庫的客戶，還可以享受一年更新服務。在Cisco的350-401在線考題考試題庫頁面中，我們擁有所有最新的考古題，由Goldmile-Infobiz資深認證講師和經驗豐富的技術專家精心編輯而來，完整覆蓋最新試題。
350-401 PDF DEMO:
QUESTION NO: 1
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 2
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 3
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 4
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
Cisco的PECB NIS-2-Directive-Lead-Implementer考試認證是業界廣泛認可的IT認證，世界各地的人都喜歡Cisco的PECB NIS-2-Directive-Lead-Implementer考試認證，這項認證可以強化自己的職業生涯，使自己更靠近成功。 而Goldmile-Infobiz網站的最新版的考古題就確保您通過此認證，Google Associate-Cloud-Engineer題庫是由多位專業的資深講師研究而來，成就您的夢想！ Salesforce MCE-Admn-201 - 有了目標就要勇敢的去實現。 Adobe AD0-E608-KR - 能使Goldmile-Infobiz在這麼多同行中脫穎而出的原因是我們有相當準確確命中考題的考試練習題和答案以及可以對考試練習題和答案迅速的更新。 Adobe AD0-E725 - 就好比我，平時不努力，老大徒傷悲。
Updated: May 28, 2022