而關於Cisco 350-401認證考試認證考試的研究材料是很重要的一部分，我們的Goldmile-Infobiz能很好很快地提供關於通過Cisco 350-401認證考試認證考試的研究材料。我們的Goldmile-Infobiz的IT專家都很有經驗，他們的研究材料和你考試的考題十分接近的，幾乎一模一樣。Goldmile-Infobiz是一個專門為要參加認證考試的人提供便利的網站，能有效的幫助考生通過考試。 有些網站在互聯網上為你提供高品質和最新的Cisco的350-401認證考試考試學習資料，但他們沒有任何相關的可靠保證，在這裏我要說明的是這Goldmile-Infobiz一個有核心價值的問題，所有Cisco的350-401認證考試考試都是非常重要的，但在個資訊化快速發展的時代，Goldmile-Infobiz只是其中一個，為什麼大多數人選擇Goldmile-Infobiz，是因為Goldmile-Infobiz所提供的考題資料一定能幫助你通過測試，，為什麼呢，因為它提供的資料都是最新的，這也是大多數考生通過實踐證明了的。 Goldmile-Infobiz為了給正在為350-401認證考試認證考試的備考的考生減輕壓力，節約時間和精力，專門研究了多種培訓工具，所以在Goldmile-Infobiz你可以選擇適合你的快速培訓方式來通過考試。
CCNP Enterprise 350-401 Goldmile-Infobiz的產品是一個很可靠的培訓工具。
你在擔心如何通過可怕的Cisco的350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR)認證考試考試嗎？不用擔心，有Goldmile-Infobiz Cisco的350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR)認證考試考試培訓資料在手，任何IT考試認證都變得很輕鬆自如。 而Goldmile-Infobiz是一個能幫助你成功通過Cisco 350-401 證照指南 的網站。我相信不論在哪個行業工作的人都希望自己有很好的職業前景。
Goldmile-Infobiz就是一個能成就很多IT專業人士夢想的網站。如果你有IT夢，就趕緊來Goldmile-Infobiz吧，它有超級好培訓資料即Goldmile-Infobiz Cisco的350-401認證考試考試培訓資料， 這個培訓資料是每個IT人士都非常渴望的，因為它會讓你通過考試獲得認證，從此以後在職業道路上步步高升。
Cisco 350-401認證考試 - 也只有这样你才可以获得更多的发展机会。
你還在猶豫什麼，機不可失，失不再來。現在你就可以獲得Cisco的350-401認證考試考題的完整本，只要你進Goldmile-Infobiz網站就能滿足你這個小小的欲望。你找到了最好的350-401認證考試考試培訓資料，請你放心使用我們的考題及答案，你一定會通過的。
你購買了考古題以後還可以得到一年的免費更新服務，一年之內，只要你想更新你擁有的資料，那麼你就可以得到最新版。有了這個資料你就能輕鬆通過350-401認證考試考試，獲得資格認證。
350-401 PDF DEMO:
QUESTION NO: 1
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 2
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 3
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 5
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
為了配合當前真正的考驗，從Goldmile-Infobiz Cisco的Huawei H12-611_V2.0考試認證考試考古題的技術團隊的任何變化及時更新的問題和答案，我們也總是接受用戶回饋的問題，充分的利用了一些建議，從而達到完美的Goldmile-Infobiz Cisco的Huawei H12-611_V2.0考試認證測試資料，使我們Goldmile-Infobiz始終擁有最高的品質。 隨著NASM CPT考試的變化，Goldmile-Infobiz已經跟新了考試問題和答案，包括一些新增的問題，通過使用更新版本的Cisco NASM CPT考古題，您可以輕松快速的通過考試，還節約寶貴的時間。 我們Goldmile-Infobiz Cisco的HP HPE6-A87考試認證資料是全球所有網站不能夠媲美的，當然這不僅僅是品質的問題，我們的品質肯定是沒得說，更重要的是我們Goldmile-Infobiz Cisco的HP HPE6-A87考試認證資料適合所有的IT考試認證，它的使用性達到各個IT領域，所以我們Goldmile-Infobiz網站得到很多考生的關注，他們相信我們，依賴我們，這也是我們Goldmile-Infobiz網站所擁有的實力所體現之處，我們的考試培訓資料能讓你買了之後不得不向你的朋友推薦，並讚不絕口，因為它真的對你們有很大的幫助。 你可以通過免費下載我們的Goldmile-Infobiz提供的部分關於Cisco Fortinet FCSS_NST_SE-7.4考題及答案作為嘗試來確定我們的可靠性，相信你會很滿意的。 我們Goldmile-Infobiz是一家專業的IT認證網站，它的認證成功率達到100%，許多考生實踐證明了的，因為我們Goldmile-Infobiz擁有一支強大的IT專家隊伍，他們致力於廣大考生的考試題及答案，為廣大考生的切身利益而服務，用自己專業的頭腦和豐富的經驗來滿足考生們的需求，根據考生的需求從各個角度出發，針對性的設計適用性強的考試培訓資料，也就是 Cisco的The Open Group OGEA-101考試培訓資料，包括試題及答案。
Updated: May 28, 2022