空想可以使人想出很多絕妙的主意，但卻辦不了任何事情。所以當你苦思暮想的如何通過Cisco的350-401題庫認證考試時，還不如打開你的電腦，點擊Goldmile-Infobiz，你就會看到你最想要的東西，價格非常優惠，品質可以保證，而且保證你100%通過考試。 如果你考試失敗，我們會全額退款的。Goldmile-Infobiz的資深專家利用他們豐富的知識和經驗研究出來的關於Cisco 350-401題庫 認證考試的練習題和答案和真實考試的試題有95%的相似性。 Goldmile-Infobiz的350-401題庫資料不僅能讓你通過考試，還可以讓你學到關於350-401題庫考試的很多知識。
CCNP Enterprise 350-401 永遠不要說你已經盡力了。
Goldmile-Infobiz提供的培訓材料包括Cisco 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR)題庫 認證考試的類比測試軟體和相關類比試題，練習題和答案。 要做就做一個勇往直前的人，那樣的人生才有意義。人生舞臺的大幕隨時都可能拉開，關鍵是你願意表演，還是選擇躲避，能把在面前行走的機會抓住的人，十有八九都是成功的。
Cisco 350-401題庫認證考試在競爭激烈的IT行業中越來越受歡迎，報名參加考試的人越來越多。但是它的難度並沒有減小，依然很難通過考試，畢竟這是個權威的檢驗電腦專業知識和資訊技術能力的考試。一般人為了通過Cisco 350-401題庫 認證考試都需要花費大量的時間和精力來復習備考。
Goldmile-Infobiz可以帮助你通过Cisco 350-401題庫考试。
通過350-401題庫考試認證，如同通過其他世界知名認證，得到國際的承認及接受，350-401題庫考試認證也有其廣泛的IT認證，世界各地的人們都喜歡選擇350-401題庫考試認證，使自己的職業生涯更加強化與成功，在Goldmile-Infobiz，你可以選擇適合你學習能力的產品。
所以，你很有必要選擇一個高效率的考試參考資料。當然，最重要的是要選一個適合自己的工具來更好地準備考試，這是一個與你是否可以順利通過考試相關的問題。
350-401 PDF DEMO:
QUESTION NO: 1
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 2
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 3
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 4
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
你已經看到Goldmile-Infobiz Cisco的Cisco 300-610考試認證培訓資料，是時候做出選擇了，你甚至可以選擇其他的產品，不過你要知道我們Goldmile-Infobiz帶給你的無限大的利益，也只有Goldmile-Infobiz能給你100%保證成功，Goldmile-Infobiz能讓你有個美好的前程，讓你以後在IT行業有更寬廣的道路可以走，高效率的工作在資訊技術領域。 通過客戶的完全信任，我們為考生提供真實有效的訓練，幫助大家在第一次Cisco SAP C-S4CPB-2508考試中順利通過。 SAP C-ARP2P-2508 - 我們都知道，在互聯網普及的時代，需要什麼資訊那是非常簡單的事情，不過缺乏的是品質及適用性的問題。 但是通過最新的Cisco Scaled Agile SAFe-Agilist認證考試并不簡單，並不是僅僅依靠與Scaled Agile SAFe-Agilist考試相關的書籍就可以辦到的。 IIBA CPOA - 在真實的生命裏，每樁偉業都有信心開始，並由信心跨出第一步。
Updated: May 28, 2022