So you have no reason not to choose it. IT certification candidates are mostly working people. Therefore, most of the candidates did not have so much time to prepare for the exam. We can sure that it is very significant for you to be aware of the different text types and how best to approach them by demo. At the same time, our 200-301 Answers quiz torrent has summarized some features and rules of the cloze test to help customers successfully pass their exams. We are through thick and thin with you and to accept this challenge together.
CCNA 200-301 It will help us to pass the exam successfully.
CCNA 200-301 Answers - Cisco Certified Network Associate Exam In every area, timing counts importantly. To get the Cisco Latest Test 200-301 Simulations exam certification is the goal of many IT people & Network professionals. The pass rate of Goldmile-Infobiz is incredibly high.
All customer information to purchase our 200-301 Answers guide torrent is confidential to outsides. You needn’t worry about your privacy information leaked by our company. People who can contact with your name, e-mail, telephone number are all members of the internal corporate.
Cisco 200-301 Answers - Then, you need to upgrade and develop yourself.
With our software version of our 200-301 Answers guide braindumps, you can practice and test yourself just like you are in a real exam for our 200-301 Answers study materials have the advandage of simulating the real exam. The results of your 200-301 Answers exam will be analyzed and a statistics will be presented to you. So you can see how you have done and know which kinds of questions of the 200-301 Answers exam are to be learned more.
Whatever exam you choose to take, Goldmile-Infobiz training dumps will be very helpful to you. Because all questions in the actual test are included in Goldmile-Infobiz practice test dumps which provide you with the adequate explanation that let you understand these questions well.
200-301 PDF DEMO:
QUESTION NO: 1
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 2
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 3
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 4
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
QUESTION NO: 5
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
To better understand our SAP C-ABAPD-2507 preparation questions, you can also look at the details and the guarantee. ACFE CFE-Investigation - With the popularity of the computer, hardly anyone can't use a computer. Microsoft GH-200 - Customer first, service first is our principle of service. IBM C1000-200 - All questions that may appear in the exam are included in our exam dumps. CompTIA XK0-006 - The data showed that our high pass rate is unbelievably 98% to 100%.
Updated: May 28, 2022