Our 200-301 Dump exam dumps are required because people want to get succeed in IT field by clearing the certification exam. Passing 200-301 Dump practice exam is not so easy and need to spend much time to prepare the training materials, that's the reason that so many people need professional advice for 200-301 Dump exam prep. The 200-301 Dump dumps pdf are the best guide for them passing test. 200-301 Dump study pdf contains the questions which are all from the original question pool, together with verified answers. Besides, the explanations are very detail and helpful after the 200-301 Dump questions where is needed. The 99% pass rate of 200-301 Dump training vce will ensure you 100% pass.
CCNA 200-301 It is so cool even to think about it.
Our 200-301 - Cisco Certified Network Associate Exam Dump real dumps cover the comprehensive knowledge points and latest practice materials that enough to help you clear 200-301 - Cisco Certified Network Associate Exam Dump exam tests. The innovatively crafted dumps will serve you the best; imparting you information in fewer number of questions and answers. Created on the exact pattern of the actual Reliable 200-301 Exam Dumps Materials tests, Goldmile-Infobiz’s dumps comprise questions and answers and provide all important Reliable 200-301 Exam Dumps Materials information in easy to grasp and simplified content.
Our 200-301 Dump preparationdumps are considered the best friend to help the candidates on their way to success for the exactness and efficiency based on our experts’ unremitting endeavor. This can be testified by our claim that after studying with our 200-301 Dump actual exam for 20 to 30 hours, you will be confident to take your 200-301 Dump exam and successfully pass it. Tens of thousands of our loyal customers relayed on our 200-301 Dump preparation materials and achieved their dreams.
Cisco 200-301 Dump - This certification gives us more opportunities.
Many exam candidates feel hampered by the shortage of effective 200-301 Dump preparation quiz, and the thick books and similar materials causing burden for you. Serving as indispensable choices on your way of achieving success especially during this 200-301 Dump exam, more than 98 percent of candidates pass the exam with our 200-301 Dump training guide and all of former candidates made measurable advance and improvement.
Therefore, modern society is more and more pursuing efficient life, and our 200-301 Dump exam materials are the product of this era, which conforms to the development trend of the whole era. It seems that we have been in a state of study and examination since we can remember, and we have experienced countless tests, including the qualification examinations we now face.
200-301 PDF DEMO:
QUESTION NO: 1
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
QUESTION NO: 2
Which network allows devices to communicate without the need to access the Internet?
A. 209.165.201.0/24
B. 192.0.0.0/8
C. 172.28.0.0/16
D. 1729.0.0/16
Answer: C
Explanation:
This question asks about the private ranges of IPv4 addresses. The private ranges of each class of IPv4 are listed below:
Class A private IP address ranges from 10.0.0.0 to 10.255.255.255 Class B private IP address ranges from 172.16.0.0 to 172.31.255.255 Class C private IP address ranges from 192.168.0.0 to
192.168.255.255 Only the network 172.28.0.0/16 belongs to the private IP address (of class B).
QUESTION NO: 3
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 4
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 5
Which set of action satisfy the requirement for multi-factor authentication?
A. The user enters a user name and password and then re-enters the credentials on a second screen
B. The user swipes a key fob, then clicks through an email link
C. The user enters a user name and password, and then clicks a notification in an authentication app on a mobile device
D. The user enters a PIN into an RSA token, and then enters the displayed RSA key on a login screen
Answer: C
Explanation:
This is an example of how two-factor authentication (2FA) works:
1. The user logs in to the website or service with their username and password.
2. The password is validated by an authentication server and, if correct, the user becomes eligible for the second factor.
3. The authentication server sends a unique code to the user's second-factor method (such as a smartphone app).
4. The user confirms their identity by providing the additional authentication for their second-factor method.
Program, you can enjoy our HP HPE7-A08 test material service. Amazon SAP-C02-KR - If you make up your mind, choose us! Our The Open Group OGEA-101 exam braindumps are the hard-won fruit of our experts with their unswerving efforts in designing products and choosing test questions. Adobe AD0-E136 - Of course, their service attitude is definitely worthy of your praise. CompTIA CV0-004 - In fact, all three versions contain the same questions and answers.
Updated: May 28, 2022