Are you trying to pass the 350-401 Cost exam to get the longing 350-401 Cost certification? As we know, there are a lot of the advantages of the certification, such as higher salaries, better job positions and so on. Perhaps at this moment, you need the help of our 350-401 Cost study materials. As our company's flagship product, it has successfully helped countless candidates around the world to obtain the coveted 350-401 Cost certification. We have the best 350-401 Cost exam braindumps for guaranteed results. You can never fail 350-401 Cost exam if you use our products. But if it is too complex, not only can’t we get good results, but also the burden of students' learning process will increase largely.
You will our 350-401 Cost exam dumps are the best!
CCNP Enterprise 350-401 Cost - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Now this is the age of the Internet, there are a lot of shortcut to success. You can also know how to contact us and what other client’s evaluations about our 350-401 100% Correct Answers test braindumps. The pages of our product also provide other information about our product and the exam.
If you are concerned about the test, however, you can choose Goldmile-Infobiz's Cisco 350-401 Cost exam training materials. No matter how low your qualifications, you can easily understand the content of the training materials. And you can pass the exam successfully.
Cisco 350-401 Cost - The procedure of refund is very simple.
Are you satisfied with your present job? Are you satisfied with what you are doing? Do you want to improve yourself? To master some useful skills is helpful to you. Now that you choose to work in the IT industry, you must register IT certification test and get the IT certificate which will help you to upgrade yourself. What's more important, you can prove that you have mastered greater skills. And then, to take Cisco 350-401 Cost exam can help you to express your desire. Don't worry. Goldmile-Infobiz will help you to find what you need in the exam and our dumps must help you to obtain 350-401 Cost certificate.
If you pay attention to using our 350-401 Cost practice engine, thing will be solved easily. No one lose interest during using our 350-401 Cost actual exam and become regular customers eventually.
350-401 PDF DEMO:
QUESTION NO: 1
Which statement explains why Type 1 hypervisor is considered more efficient than Type 2 hypervisor?
A. Type 1 hypervisor enables other operating systems to run on it
B. Type 1 hypervisor runs directly on the physical hardware of the host machine without relying on the underlying OS
C. Type 1 hypervisor relics on the existing OS of the host machine to access CPU, memory, storage, and network resources.
D. Type 1 hypervisor is the only type of hypervisor that supports hardware acceleration techniques
Answer: B
Explanation:
There are two types of hypervisors: type 1 and type 2 hypervisor.
In type 1 hypervisor (or native hypervisor), the hypervisor is installed directly on the physical server.
Then instances of an operating system (OS) are installed on the hypervisor. Type 1 hypervisor has direct access to the hardware resources. Therefore they are more efficient than hosted architectures.
Some examples of type 1 hypervisor are VMware vSphere/ESXi, Oracle VM Server, KVM and
Microsoft Hyper-V.
In contrast to type 1 hypervisor, a type 2 hypervisor (or hosted hypervisor) runs on top of an operating system and not the physical hardware directly. A big advantage of Type 2 hypervisors is that management console software is not required.
QUESTION NO: 2
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
QUESTION NO: 3
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 4
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 5
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
If you successfully get Cisco Huawei H19-410_V1.0 certificate, you can finish your work better. Our Pegasystems PEGACPCSD25V1 exam prep is of reasonably great position from highly proficient helpers who have been devoted to their quality over ten years to figure your problems out. Goldmile-Infobiz Cisco Amazon SAA-C03-KR questions and answers are a rare material which can help you pass you exam first time. We believe that you will never regret to buy and practice our Microsoft AZ-204-KR latest question. SAP C-SIGVT-2506 - Revealing whether or not a man succeeded often reflect in the certificate he obtains, so it is in IT industry.
Updated: May 28, 2022