Before you buy our product, you can download and try out it freely so you can have a good understanding of our 350-401 Dumps quiz prep. Please feel safe to purchase our 350-401 Dumps exam torrent any time as you like. We provide the best service to the client and hope the client can be satisfied. Many candidates are used to printing out and then writing & reading of 350-401 Dumps reliable exam guide on paper. Yes, it is silent and clear. And if you find that your version of the 350-401 Dumps practice guide is over one year, you can enjoy 50% discount if you buy it again.
CCNP Enterprise 350-401 As old saying goes, all roads lead to Rome.
Many people worry about buying electronic products on Internet, like our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Dumps preparation quiz, we must emphasize that our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Dumps simulating materials are absolutely safe without viruses, if there is any doubt about this after the pre-sale, we provide remote online guidance installation of our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Dumps exam practice. For it also supports the offline practice. And the best advantage of the software version is that it can simulate the real exam.
We will simplify the complex concepts by adding diagrams and examples during your study. By choosing our 350-401 Dumps test material, you will be able to use time more effectively than others and have the content of important information in the shortest time. Because our 350-401 Dumps exam torrent is delivered with fewer questions but answer the most important information to allow you to study comprehensively, easily and efficiently.
Cisco 350-401 Dumps - So our system is great.
Your eligibility of getting a high standard of career situation will be improved if you can pass the exam, and our 350-401 Dumps study guide are your most reliable ways to get it. You can feel assertive about your exam with our 100 guaranteed professional 350-401 Dumps practice engine for you can see the comments on the websites, our high-quality of our 350-401 Dumps learning materials are proved to be the most effective exam tool among the candidates.
In order to help all people to pass the 350-401 Dumps exam and get the related certification in a short time, we designed the three different versions of the 350-401 Dumps study materials. We can promise that the products can try to simulate the real examination for all people to learn and test at same time and it provide a good environment for learn shortcoming in study course.
350-401 PDF DEMO:
QUESTION NO: 1
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 2
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 3
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 4
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
So your personal effort is brilliant but insufficient to pass the Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) exam and our APICS CPIM-8.0 test guide can facilitate the process smoothly & successfully. If you are an ambitious person, our Amazon SOA-C03 exam questions can be your best helper. Fortinet FCSS_SDW_AR-7.6 - There is no doubt they are clear-cut and easy to understand to fulfill your any confusion about the exam. Microsoft MB-800 - As the old saying goes, practice is the only standard to testify truth. In order to gain the trust of new customers, Snowflake SnowPro-Core-KR practice materials provide 100% pass rate guarantee for all purchasers.
Updated: May 28, 2022