Our society needs all kinds of comprehensive talents, the 350-401 Testking latest dumps can give you what you want, but not just some boring book knowledge, but flexible use of combination with the social practice. Therefore, it is necessary for us to pass all kinds of qualification examinations, the 350-401 Testking study practice question can bring you high quality learning platform. In today's era, knowledge is becoming more and more important, and talents are becoming increasingly saturated. Not only our 350-401 Testking practice braindumps can help you study the latest knowledage on the subject but also it will help you achieve the certification for sure so that you will get a better career. Fate is not an opportunity but a choice. The test software used in our products is a perfect match for Windows' 350-401 Testking learning material, which enables you to enjoy the best learning style on your computer.
CCNP Enterprise 350-401 These services assure your avoid any loss.
The high quality product like our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Testking study quiz has no need to advertise everywhere, and exerts influential effects which are obvious and everlasting during your preparation. We have free demos of our 350-401 Certification Book Torrent exam questions for your information and the demos offer details of real exam contents. All contents of 350-401 Certification Book Torrent practice quiz contain what need to be mastered.
You will find the exam is a piece of cake with the help of our 350-401 Testking study materials. Being anxious for the 350-401 Testking exam ahead of you? Have a look of our 350-401 Testking training engine please. Presiding over the line of our practice materials over ten years, our experts are proficient as elites who made our 350-401 Testking learning questions, and it is their job to officiate the routines of offering help for you.
Cisco 350-401 Testking - It can maximize the efficiency of your work.
As is known to us, there are best sale and after-sale service of the 350-401 Testking study materials all over the world in our company. Our company has employed a lot of excellent experts and professors in the field in the past years, in order to design the best and most suitable 350-401 Testking study materials for all customers. More importantly, it is evident to all that the 350-401 Testking study materials from our company have a high quality, and we can make sure that the quality of our products will be higher than other study materials in the market. If you want to pass the 350-401 Testking exam and get the related certification in the shortest time, choosing the 350-401 Testking study materials from our company will be in the best interests of all people. We can make sure that it will be very easy for you to pass your exam and get the related certification in the shortest time that beyond your imagination.
Goldmile-Infobiz guarantee that you will be able to pass the exam. If you are still hesitant, download our sample of material, then you can know the effect.
350-401 PDF DEMO:
QUESTION NO: 1
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 2
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 3
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 4
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
The Open Group OGBA-101 - Once our system receives your application, it will soon send you what you need. Amazon SCS-C02 - Help you in your career in your advantage successfully. Workday Workday-Pro-HCM-Reporting - You can find their real comments in the comments sections. Apple DEP-2025 - Dreams and hopes are important, but more important is to go to practice and prove. Microsoft SC-401 - Many people always are stopped by the difficult questions.
Updated: May 28, 2022