Maybe you will ask whether we will charge additional service fees. We assure you that we are focused on providing you with guidance about our 350-401 Dumps.Zip exam question, but all services are free. If you encounter installation problems, we will have professionals to provide you with remote assistance. We have employed a lot of online workers to help all customers solve their problem. If you have any questions about the 350-401 Dumps.Zip learning dumps, do not hesitate and ask us in your anytime, we are glad to answer your questions and help you use our 350-401 Dumps.Zip study questions well. All 350-401 Dumps.Zip practice questions you should know are written in them with three versions to choose from: the PDF, the Software and the APP online.
CCNP Enterprise 350-401 Perhaps this is the beginning of your change.
Many exam candidates feel hampered by the shortage of effective 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Dumps.Zip preparation quiz, and the thick books and similar materials causing burden for you. Therefore, modern society is more and more pursuing efficient life, and our Valid Exam Collection 350-401 File exam materials are the product of this era, which conforms to the development trend of the whole era. It seems that we have been in a state of study and examination since we can remember, and we have experienced countless tests, including the qualification examinations we now face.
Each version has its own advantages and features, 350-401 Dumps.Zip test material users can choose according to their own preferences. The most popular version is the PDF version of 350-401 Dumps.Zip exam prep. The PDF version of 350-401 Dumps.Zip test questions can be printed out to facilitate your learning anytime, anywhere, as well as your own priorities.
Our Cisco 350-401 Dumps.Zip learning guide will be your best choice.
Our company always put the quality of the 350-401 Dumps.Zip practice materials on top priority. In the past ten years, we have made many efforts to perfect our 350-401 Dumps.Zip study materials. Our 350-401 Dumps.Zip study questions cannot tolerate any small mistake. All staff has made great dedication to developing the 350-401 Dumps.Zip exam simulation. Our professional experts are devoting themselves on the compiling and updating the exam materials and our services are ready to guide you 24/7 when you have any question.
After your payment, we will send the updated 350-401 Dumps.Zip exam to you immediately and if you have any question about updating, please leave us a message. In accordance with the actual exam, we provide the latest 350-401 Dumps.Zip exam dumps for your practices.
350-401 PDF DEMO:
QUESTION NO: 1
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
QUESTION NO: 2
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 3
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
Microsoft PL-900 - Up to now, more than 98 percent of buyers of our practice materials have passed it successfully. HRPA CHRP-KE - We offer the most considerate after-sales services for you 24/7 with the help of patient staff and employees. Unlike many other learning materials, our Microsoft PL-200 study materials are specially designed to help people pass the exam in a more productive and time-saving way, and such an efficient feature makes it a wonderful assistant in personal achievement as people have less spare time nowadays. In today’s society, many enterprises require their employees to have a professional Microsoft AZ-305 certification. Goldmile-Infobiz provide training tools included Cisco certification Network Appliance NS0-094 exam study materials and simulation training questions and more importantly, we will provide you practice questions and answers which are very close with real certification exam.
Updated: May 28, 2022