Second, focus. In order to do the things we decided to complete, we have to give up all the unimportant opportunities. Third, the quality of the product. We will not only spare no efforts to design 350-401 Simulation Questions exam materials, but also try our best to be better in all after-sale service. The happiness from success is huge, so we hope that you can get the happiness after you pass 350-401 Simulation Questions exam certification with our developed software. With it, you will pass the exam and achieve excellent results, towards your ideal place.
CCNP Enterprise 350-401 It is so cool even to think about it.
You will get our valid 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Simulation Questions dumps torrent and instantly download the exam pdf after payment. The best part of 350-401 Online Tests exam dumps are their relevance, comprehensiveness and precision. You need not to try any other source for350-401 Online Tests exam preparation.
Our 350-401 Simulation Questions preparationdumps are considered the best friend to help the candidates on their way to success for the exactness and efficiency based on our experts’ unremitting endeavor. This can be testified by our claim that after studying with our 350-401 Simulation Questions actual exam for 20 to 30 hours, you will be confident to take your 350-401 Simulation Questions exam and successfully pass it. Tens of thousands of our loyal customers relayed on our 350-401 Simulation Questions preparation materials and achieved their dreams.
Cisco 350-401 Simulation Questions - So your success is guaranteed.
Free renewal of our 350-401 Simulation Questions study prep in this respect is undoubtedly a large shining point. Apart from the advantage of free renewal in one year, our 350-401 Simulation Questions exam engine offers you constant discounts so that you can save a large amount of money concerning buying our 350-401 Simulation Questions training materials. And we give these discount from time to time, so you should come and buy 350-401 Simulation Questions learning guide more and you will get more rewards accordingly.
And we have patient and enthusiastic staff offering help on our 350-401 Simulation Questions learning prep. We have harmonious cooperation with exam candidates.
350-401 PDF DEMO:
QUESTION NO: 1
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
QUESTION NO: 2
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 3
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
With our Microsoft PL-600 practice materials, and your persistence towards success, you can be optimistic about your Microsoft PL-600 real dumps. Since we can always get latest information resource, we have unique advantages on Workday Workday-Pro-Talent-and-Performance study guide. The moment you money has been transferred to our account, and our system will send our SAP C-THR70-2505training dumps to your mail boxes so that you can download SAP C-THR70-2505 exam questions directly. Huawei H19-162_V1.0 - You will never be frustrated by the fact that you can't solve a problem. Meanwhile, if you want to keep studying this course , you can still enjoy the well-rounded services by AGRC ICCGO test prep, our after-sale services can update your existing AGRC ICCGO study quiz within a year and a discount more than one year.
Updated: May 28, 2022