By researching on the frequent-tested points in the real exam, our experts have made both clear outlines and comprehensive questions into our 350-401 Simulations exam prep. So our 350-401 Simulations practice engine is easy for you to understand. With passing rate up to 98 to 100 percent, the quality and accuracy of our 350-401 Simulations training materials are unquestionable. In order to grasp so much knowledge, generally, it need to spend a lot of time and energy to review many books. Goldmile-Infobiz is a website which can help you save time and energy to rapidly and efficiently master the Cisco certification 350-401 Simulations exam related knowledge. About choosing the perfect 350-401 Simulations study material, it may be reflected in matters like quality, prices, after-sale services and so on.
CCNP Enterprise 350-401 Goldmile-Infobiz will help you achieve your dream.
CCNP Enterprise 350-401 Simulations - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Facts proved that if you do not have the certification, you will be washed out by the society. Do not spend too much time and money, as long as you have Goldmile-Infobiz learning materials you will easily pass the exam. In order to help you more Goldmile-Infobiz the Cisco 350-401 Test Vce Free exam eliminate tension of the candidates on the Internet.
Originating the 350-401 Simulations exam questions of our company from tenets of offering the most reliable backup for customers, and outstanding results have captured exam candidates’ heart for their functions. Our 350-401 Simulations practice materials can be subdivided into three versions. All those versions of usage has been well-accepted by them.
Cisco 350-401 Simulations - So our system is wonderful.
In this era, everything is on the rise. Do not you want to break you own? Double your salary, which is not impossible. Through the Cisco 350-401 Simulations exam, you will get what you want. Goldmile-Infobiz will provide you with the best training materials, and make you pass the exam and get the certification. It's a marvel that the pass rate can achieve 100%. This is indeed true, no doubt, do not consider, act now.
If you have tried on our 350-401 Simulations exam questions, you may find that our 350-401 Simulations study materials occupy little running memory. So it will never appear flash back.
350-401 PDF DEMO:
QUESTION NO: 1
Which statement explains why Type 1 hypervisor is considered more efficient than Type 2 hypervisor?
A. Type 1 hypervisor enables other operating systems to run on it
B. Type 1 hypervisor runs directly on the physical hardware of the host machine without relying on the underlying OS
C. Type 1 hypervisor relics on the existing OS of the host machine to access CPU, memory, storage, and network resources.
D. Type 1 hypervisor is the only type of hypervisor that supports hardware acceleration techniques
Answer: B
Explanation:
There are two types of hypervisors: type 1 and type 2 hypervisor.
In type 1 hypervisor (or native hypervisor), the hypervisor is installed directly on the physical server.
Then instances of an operating system (OS) are installed on the hypervisor. Type 1 hypervisor has direct access to the hardware resources. Therefore they are more efficient than hosted architectures.
Some examples of type 1 hypervisor are VMware vSphere/ESXi, Oracle VM Server, KVM and
Microsoft Hyper-V.
In contrast to type 1 hypervisor, a type 2 hypervisor (or hosted hypervisor) runs on top of an operating system and not the physical hardware directly. A big advantage of Type 2 hypervisors is that management console software is not required.
QUESTION NO: 2
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
QUESTION NO: 3
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 4
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 5
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
Microsoft MD-102 - Within the last few decades, IT got a lot of publicity and it has been a necessary and desirable part of modern life. Fortinet FCP_FAZ_AD-7.4 - All contents are passing rigid inspection. Cisco 300-535 - Somebody must have been using Goldmile-Infobiz dumps. Before you choose to end your practices of the Linux Foundation CKS study materials, the screen will display the questions you have done, which help you check again to ensure all questions of Linux Foundation CKS practice prep are well finished. SAP C_THR82_2505 - In this, you can check its quality for yourself.
Updated: May 28, 2022