Our 350-401 Training exam guide are cost-effective. As you may know that the windows software of the 350-401 Training study materials only supports windows operating system. Also, it needs to run on Java environment. If you are a diligent person, we strongly advise you to try our 350-401 Training real test. You will be attracted greatly by our 350-401 Training practice engine. With our 350-401 Training real exam, we look forward to your joining.
CCNP Enterprise 350-401 What should we do? It doesn't matter.
Our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Training preparation practice are highly targeted and have a high hit rate, there are a lot of learning skills and key points in the exam, even if your study time is very short, you can also improve your 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Training exam scores very quickly. To prepare for Test 350-401 Objectives exam, you do not need read a pile of reference books or take more time to join in related training courses, what you need to do is to make use of our Goldmile-Infobiz exam software, and you can pass the exam with ease. Our exam dumps can not only help you reduce your pressure from Test 350-401 Objectives exam preparation, but also eliminate your worry about money waste.
Just be confident to face new challenge! As the old saying tells that, he who doesn't go advance will lose his ground. So you will have a positive outlook on life.
Cisco 350-401 Training exam prep look forward to meeting you.
Our passing rate is 98%-100% and there is little possibility for you to fail in the exam. But if you are unfortunately to fail in the exam we will refund you in full immediately. Some people worry that if they buy our 350-401 Training exam questions they may fail in the exam and the procedure of the refund is complicated. But we guarantee to you if you fail in we will refund you in full immediately and the process is simple. If only you provide us the screenshot or the scanning copy of the 350-401 Training failure marks we will refund you immediately. If you have doubts or other questions please contact us by emails or contact the online customer service and we will reply you and solve your problem as quickly as we can. So feel relieved when you buy our 350-401 Training guide torrent.
I hope that you can spend a little time understanding what our study materials have to attract customers compared to other products in the industry. As you know, we are now facing very great competitive pressure.
350-401 PDF DEMO:
QUESTION NO: 1
Which statement explains why Type 1 hypervisor is considered more efficient than Type 2 hypervisor?
A. Type 1 hypervisor enables other operating systems to run on it
B. Type 1 hypervisor runs directly on the physical hardware of the host machine without relying on the underlying OS
C. Type 1 hypervisor relics on the existing OS of the host machine to access CPU, memory, storage, and network resources.
D. Type 1 hypervisor is the only type of hypervisor that supports hardware acceleration techniques
Answer: B
Explanation:
There are two types of hypervisors: type 1 and type 2 hypervisor.
In type 1 hypervisor (or native hypervisor), the hypervisor is installed directly on the physical server.
Then instances of an operating system (OS) are installed on the hypervisor. Type 1 hypervisor has direct access to the hardware resources. Therefore they are more efficient than hosted architectures.
Some examples of type 1 hypervisor are VMware vSphere/ESXi, Oracle VM Server, KVM and
Microsoft Hyper-V.
In contrast to type 1 hypervisor, a type 2 hypervisor (or hosted hypervisor) runs on top of an operating system and not the physical hardware directly. A big advantage of Type 2 hypervisors is that management console software is not required.
QUESTION NO: 2
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
QUESTION NO: 3
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 4
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 5
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
To become a well-rounded person with the help of our Cisco 350-501 study questions, reducing your academic work to a concrete plan made up of concrete actions allows you to streamline and gain efficiency, while avoiding pseudo work and guilt. Therefore, we believe that you will never regret to use the Oracle 1z0-809-KR exam dumps. After undergoing a drastic change over these years, our PRINCE2 P3O-Foundation actual exam have been doing perfect job in coping with the exam. Our PMI CAPM real exam try to ensure that every customer is satisfied, which can be embodied in the convenient and quick refund process. If you want to have an outline and brief understanding of our Juniper JN0-452 preparation materials we offer free demos for your reference.
Updated: May 28, 2022