Help is to arrange time for you and provide you with perfect service. What are the advantages of our 200-301 Clearer Explanation test guide? I hope you can take a moment to find out. 200-301 Clearer Explanation certification can demonstrate your mastery of certain areas of knowledge, which is internationally recognized and accepted by the general public as a certification. By concluding quintessential points into 200-301 Clearer Explanation actual exam, you can pass the exam with the least time while huge progress. Our 200-301 Clearer Explanation exam braindumps are famous for its advantage of high efficiency and good quality which are carefully complied by the professionals. We are aimed to develop a long-lasting and reliable relationship with our customers who are willing to purchase our 200-301 Clearer Explanation study materials.
CCNA 200-301 It can maximize the efficiency of your work.
CCNA 200-301 Clearer Explanation - Cisco Certified Network Associate Exam We can make sure that it will be very easy for you to pass your exam and get the related certification in the shortest time that beyond your imagination. Do not hesitate, add the exam material to your shopping cart quickly. If you miss it you will regret for a lifetime.
And you will have the demos to check them out. Do you want to try our free demo of the 200-301 Clearer Explanation study questions? Your answer must be yes. So just open our websites in your computer.
Cisco 200-301 Clearer Explanation - It can help you to pass the exam successfully.
Do you have tried the 200-301 Clearer Explanation online test engine? Here we will recommend the 200-301 Clearer Explanation online test engine offered by Goldmile-Infobiz for all of you. Firstly, 200-301 Clearer Explanation online training can simulate the actual test environment and bring you to the mirror scene, which let you have a good knowledge of the actual test situation. Secondly, the 200-301 Clearer Explanation online practice allows self-assessment, which can bring you some different experience during the preparation. You can adjust your 200-301 Clearer Explanation study plan according to the test result after each practice test.
Goldmile-Infobiz allows you to have a bright future. And allows you to work in the field of information technology with high efficiency.
200-301 PDF DEMO:
QUESTION NO: 1
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 2
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 3
Refer to the exhibit. After you apply the given configuration to arouter, the DHCP clients behind the device connot communicate with hosts outside of their subnet.
Which action is most likely to correct the problem?
A. configure the default gateway
B. Configure the dns server on the same subnet as the clients
C. Activate the dhcp pool
D. Correct the subnet mask
Answer: A
QUESTION NO: 4
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 5
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
SAP C_S4CS_2508 - If this is what you want, why are you still hesitating? To pass the Cisco CompTIA XK0-006 exam is a dream who are engaged in IT industry. Huawei H12-611_V2.0 - We have statistics to tell you the truth. It has the best training materials, which is Goldmile-Infobiz;s Cisco ITIL ITIL4-DPI exam training materials. Beyond knowing the answer, and actually understanding the HP HPE2-W12 test questions puts you one step ahead of the test.
Updated: May 28, 2022