Yes, this is true. You get what you want is one of the manifestations of success. Goldmile-Infobiz of Cisco 200-301 Exam Format exam materials is the source of your success. This can be borne out by the large number of buyers on our website every day. And our pass rate of our 200-301 Exam Format exam braindumps is high as 98% to 100%. In addition, Goldmile-Infobiz exam dumps will be updated at any time.
CCNA 200-301 Learning is the best way to make money.
We believe that you must be succeed in the exam with the help of 200-301 - Cisco Certified Network Associate Exam Exam Format test software provided by our Goldmile-Infobiz. A lot of people in the discussion said that such a good certificate is difficult to pass and actually the pass rate is quite low. Not having done any efforts of preparation is not easy to pass, after all, Cisco certification Exam 200-301 Objectives Pdf exam requires excellent expertise.
As a prestigious platform offering practice material for all the IT candidates, Goldmile-Infobiz experts try their best to research the best valid and useful Cisco 200-301 Exam Format exam dumps to ensure you 100% pass. The contents of 200-301 Exam Format exam training material cover all the important points in the 200-301 Exam Format actual test, which can ensure the high hit rate. You can instantly download the Cisco 200-301 Exam Format practice dumps and concentrate on your study immediately.
Cisco 200-301 Exam Format - At first, it can be only used on PC.
With Goldmile-Infobiz's Cisco 200-301 Exam Format exam training materials, you can get the latest Cisco 200-301 Exam Format exam questions and answers. It can make you pass the Cisco 200-301 Exam Format exam. Cisco 200-301 Exam Format exam certification can help you to develop your career. Goldmile-Infobiz's Cisco 200-301 Exam Format exam training materials is ensure that you fully understand the questions and issues behind the concept. t can help you pass the exam easily.
Our 200-301 Exam Format free dumps demo will provide you some basic information for the accuracy of our exam materials. All questions and answers in our 200-301 Exam Format real dumps are tested by our certified trainers with rich experience and one or two days is enough for you practicing valid 200-301 Exam Format exam pdf.
200-301 PDF DEMO:
QUESTION NO: 1
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 2
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 3
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 4
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 5
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
Goldmile-Infobiz Cisco Salesforce Advanced-Administrator exam training materials have the best price value. There are three versions according to your study habit and you can practice our Amazon Data-Engineer-Associate dumps pdf with our test engine that help you get used to the atmosphere of the formal test. Cisco 300-425 - I would like to find a different job, because I am tired of my job and present life. There are three different versions of our Fortinet FCSS_SDW_AR-7.4 study guide designed by our specialists in order to satisfy varied groups of people. Goldmile-Infobiz Cisco ACAMS CKYCA dumps are the certification training material that guarantees 100% sail through the test at the first attempt.
Updated: May 28, 2022