Goldmile-Infobiz's Cisco 200-301 Questions Sheet exam training materials is the best medicine for candidates. We should use the most relaxed attitude to face all difficulties. Although Cisco 200-301 Questions Sheet exam is very difficult, but we candidates should use the most relaxed state of mind to face it. You will gradually be aware of the great importance of stimulating the actual exam after learning about our 200-301 Questions Sheet study tool. Because of this function, you can easily grasp how the practice system operates and be able to get hold of the core knowledge about the Cisco Certified Network Associate Exam exam. This training materials is helpful to the candidates.
CCNA 200-301 Knowledge is wealth.
Our 200-301 - Cisco Certified Network Associate Exam Questions Sheet training materials cover the most content of the real exam and the accuracy of our 200-301 - Cisco Certified Network Associate Exam Questions Sheet test answers is 100% guaranteed. So the Boot Camp 200-301 study tool can be reused after you have got the Boot Camp 200-301 certificate. You can donate it to your classmates or friends.
Now, make a risk-free investment in training and certification with the help of 200-301 Questions Sheet practice torrent. Our 200-301 Questions Sheet test engine allows you to practice until you think it is ok. Our 200-301 Questions Sheet questions are the best relevant and can hit the actual test, which lead you successfully pass.
Cisco 200-301 Questions Sheet - We have 24/7 Service Online Support services.
Goldmile-Infobiz is a website specifically provide the certification exam information sources for IT professionals. Through many reflects from people who have purchase Goldmile-Infobiz's products, Goldmile-Infobiz is proved to be the best website to provide the source of information about certification exam. The product of Goldmile-Infobiz is a very reliable training tool for you. The answers of the exam exercises provided by Goldmile-Infobiz is very accurate. Our Goldmile-Infobiz's senior experts are continuing to enhance the quality of our training materials.
After you pay for our 200-301 Questions Sheet exam material online, you will get the link to download it in only 5 to 10 minutes. You don't have to wait a long time to start your preparation for the 200-301 Questions Sheet exam.
200-301 PDF DEMO:
QUESTION NO: 1
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 2
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 3
Refer to the exhibit. After you apply the given configuration to arouter, the DHCP clients behind the device connot communicate with hosts outside of their subnet.
Which action is most likely to correct the problem?
A. configure the default gateway
B. Configure the dns server on the same subnet as the clients
C. Activate the dhcp pool
D. Correct the subnet mask
Answer: A
QUESTION NO: 4
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 5
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
Cloud Security Alliance CCSK - Of course, there is no exception in the competitive IT industry. The APP online version of our HP HPE7-A01 real exam boosts no limits for the equipment being used and it supports any electronic equipment and the off-line use. In Goldmile-Infobiz's website you can free download study guide, some exercises and answers about Cisco certification Microsoft AI-900-KR exam as an attempt. So why still hesitate? Act now, join us, and buy our CSI CSC2 study materials. Medical Tests PTCE - I believe you will be very satisfied with our products.
Updated: May 28, 2022