Our system will automatically send the updates of the 200-301 Study Plan learning file to the clients as soon as the updates are available. So our system is wonderful. Our system is high effective and competent. This is indeed true, no doubt, do not consider, act now. In this era, everything is on the rise. If you have tried on our 200-301 Study Plan exam questions, you may find that our 200-301 Study Plan study materials occupy little running memory.
CCNA 200-301 All contents are passing rigid inspection.
CCNA 200-301 Study Plan - Cisco Certified Network Associate Exam Somebody must have been using Goldmile-Infobiz dumps. Also, it will display how many questions of the Testking 200-301 Learning Materials exam questions you do correctly and mistakenly. In a word, you can compensate for your weakness and change a correct review plan of the study materials.
You can experience it in advance. In this, you can check its quality for yourself. Goldmile-Infobiz Cisco 200-301 Study Plan practice test dumps are doubtless the best reference materials compared with other 200-301 Study Plan exam related materials.
Cisco 200-301 Study Plan - We try our best to ensure 100% pass rate for you.
Of course, 200-301 Study Plan simulating exam are guaranteed to be comprehensive while also ensuring the focus. We believe you have used a lot of 200-301 Study Plan learning materials, so we are sure that you can feel the special features of 200-301 Study Plan training questions. The most efficient our 200-301 Study Plan study materials just want to help you pass the exam more smoothly. For our technicals are checking the changes of the questions and answers everyday to keep them the latest and valid ones.
Besides, the detailed answers analysis provided by our professionals will make you be more confidence to pass 200-301 Study Plan exam. Many candidates worry that after a long-time review of 200-301 Study Plan, they may still fail the exam due to inadaptation of the test model.
200-301 PDF DEMO:
QUESTION NO: 1
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 2
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
QUESTION NO: 3
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 4
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 5
Which network allows devices to communicate without the need to access the Internet?
A. 209.165.201.0/24
B. 192.0.0.0/8
C. 172.28.0.0/16
D. 1729.0.0/16
Answer: C
Explanation:
This question asks about the private ranges of IPv4 addresses. The private ranges of each class of IPv4 are listed below:
Class A private IP address ranges from 10.0.0.0 to 10.255.255.255 Class B private IP address ranges from 172.16.0.0 to 172.31.255.255 Class C private IP address ranges from 192.168.0.0 to
192.168.255.255 Only the network 172.28.0.0/16 belongs to the private IP address (of class B).
Alibaba SAE-C01 - The science and technology are very developed now. If you want to know our Microsoft AZ-104 test questions materials, you can download our free demo now. So you can buy our HP HPE6-A87 actual test guide without any misgivings. Excellent Cisco Amazon AIF-C01-KR study guide make candidates have clear studying direction to prepare for your test high efficiently without wasting too much extra time and energy. As we all know, the latest SAP C_S4CPR_2508 quiz prep has been widely spread since we entered into a new computer era.
Updated: May 28, 2022