Cisco certification 200-301 Testing Environment exam is one of the many IT employees' most wanting to participate in the certification exams. Passing the exam needs rich knowledge and experience. While accumulating these abundant knowledge and experience needs a lot of time. What is more, it is our mission to help you pass the exam. Our study materials will provide you with 100% assurance of passing the professional qualification 200-301 Testing Environment exam. Goldmile-Infobiz provide different training tools and resources to prepare for the Cisco 200-301 Testing Environment exam.
CCNA 200-301 It is your right time to make your mark.
CCNA 200-301 Testing Environment - Cisco Certified Network Associate Exam You will have thorough training and exercises from our huge question dumps, and master every question from the detailed answer analysis. Besides, without prolonged reparation you can pass the Valid Exam 200-301 Braindumps exam within a week long. Everyone's life course is irrevocable, so missing the opportunity of this time will be a pity.
We are not satisfied with that we have helped more candidates pass 200-301 Testing Environment exam, because we know that the IT industry competition is intense, we must constantly improve our dumps so that we cannot be eliminated. So our technical teams continue to renew the 200-301 Testing Environment study materials in time, in order to let the examinee using our products to keep up with the 200-301 Testing Environment exam reform tightly.
Cisco 200-301 Testing Environment - They will mitigate your chance of losing.
We are equipped with excellent materials covering most of knowledge points of 200-301 Testing Environment pdf torrent. Our learning materials in PDF format are designed with 200-301 Testing Environment actual test and the current exam information. Questions and answers are available to download immediately after you purchased our 200-301 Testing Environment dumps pdf. The free demo of pdf version can be downloaded in our exam page.
You can send us an email to ask questions at anytime, anywhere. For any questions you may have during the use of 200-301 Testing Environment exam questions, our customer service staff will be patient to help you to solve them.
200-301 PDF DEMO:
QUESTION NO: 1
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 2
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 3
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
QUESTION NO: 4
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 5
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
Microsoft PL-400 - So if you want to save money, please choose PayPal. Only 20-30 hours on our HP HPE6-A90 learning guide are needed for the client to prepare for the test and it saves our client’s time and energy. Our goal is ensure you get high passing score in the Huawei H12-821_V1.0 practice exam with less effort and less time. We can make sure that our Fortinet FCSS_SASE_AD-25 study materials have the ability to help you solve your problem, and you will not be troubled by these questions above. Believe us and you can easily pass by our MSSC CLT exam torrent.
Updated: May 28, 2022